Glossary termArches
arch
Bogen
A curved structural member spanning an opening, made of wedge-shaped stones that carry load by compression and push outward at the supports (thrust).
Names
- English
- arch
- German
- Bogen
- French
- arc
Sources
- Ungewitter 1890, p. 24 (scan), Fig. 44
Figures in the book
- Fig. 44 · p. 24
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 2: Pointed or round?
- Lesson 3: The bay
- Lesson 4: Ribs and the cross vault
- Lesson 5: Holding back the thrust
- Lesson 6: The flying buttress
- Lesson 10: Rules of thumb across the centuries
- Lesson 11: Drawing tracery
- Lesson 12: Mouldings, gables and portals
- Lesson 13: How safe is safe? Heyman’s geometric factor
- Lesson 14: The cracked buttress
- Lesson 15: The flyer’s range of thrust
- Lesson 17: Star and net vaults
- Lesson 19: Thrust networks
- Lesson 20: Reading a cathedral
- Lesson 21: Late-Gothic vaults: tiercerons, liernes, nets, fans
- Lesson 22: Cutting the stone
- Lesson 23: Roriczer’s pinnacle
Rules that mention it
- Viollet-le-Duc's thirds rule
- Line of thrust through the abutment
- Crown load for slender pointed arches
- The pointed arch follows the line of thrust
- An arch stands while a line of thrust fits
- Line of thrust (Stützlinie)
- The most favourable line of thrust
- Limiting lines of thrust
- Rectangular side choir
- Regular choir, irregular ambulatory wall
- Organ
- Chapel walls, arches and wall piers
- Rood screen
- Two slender columns at the chapel opening
- The arch line of the flyer
- Depth of the flyer ring
- How high the buttress must rise
- Six ways to form the upper wall
- Window under the wall rib
- Lab arch: modelling assumptions
- Angle between the thrust and the joint normal
- Geometric factor of safety
- Collapse mechanism of an arch
- Minimum thickness of an arch
- Range of thrust of an arch
- Buttress against overturning: minimum depth and geometric factor
- 1890 against modern statics
- The flyer’s range of thrust
- The arch on leaning buttresses
- The leaning buttress
- The arch on spreading supports
- Estimated range of a vault’s thrust
- Canopies and pedestals
- Blind arcades and blind panels
- Wall passages before the windows
- Plaster and whitewash only where they improve
- Second system: light ground with dark lines, a flat pattern
- Window jambs and their surrounds
- Shaft count from the arcade orders
- Pier types
- Gable legs from the apex x
- Ogee gablets (Kielbogen)
- Buttress rule of the earlier editions
- Crossing pier
- Archivolts: concentric rings on the jamb orders
- Figures and canopies in the arch rings
- Foliage in the arch rings
- Bases and plinths of the jambs
- Brick portals
- Portal filling the bay between buttresses
- Capital band: separating arch from jamb
- Projecting portal: gable wall and terrace
- Ogee portal gable (Eselsrücken)
- Head of the door opening
- Hood moulding and returned courses
- One sculptural programme per portal
- Jamb figures: mounting and minimum size
- Continuous splay and jamb depth
- Stepped jamb: orders and step size
- Pinnacles beside the portal gable
- Relieving arch over the lintel
- Trumeau (middle pier)
- Tympanum: build and decoration
- Tracery in the tympanum: only with a purpose
- Portal, window and narrow bays
- Target factor of a buttress, cracked
- The Studio’s flyer against the vault
- Geometric factor of a vault, read on its equivalent arch
- Certified thrust extremes of the course pattern
- Springer courses, block and tail
- Templates on the bed or head joint
- Tracery joints square to the strands
- Crown joint or keystone
- Length of rib stones
- Voussoir joints radial to their own branch
- Coursing systems of the web
- Arcade load on a middle pier
- Least rise of the flyer in the statics
- Late-Gothic vaults in the plan
- Portal and windows of the lower storeys (TW4)
- Octagonal belfry, corner turrets and squinches (T7, TW19)
- Recursive subdivision of a window
- Circle in the head (C1, C2)
- Wheel window (R1–R3)
- Compound (four-centred) arch
- Equal-radius system
- Knickbogen (depressed pointed arch)
- Pointed (two-centred) arch
- Stilted arch
- Crown relations
- Regular springer
- Gothic rib vault
- Rib elevations unrolled on one principal arch