RuleStudio
Least rise of the flyer in the statics
studio.statics.flyer-rise
Our derivation from a construction or rule in the sources.
Statement
The flyer of the 1890 chain meets the wall at the vault thrust and springs a metre above the eaves of the aisle roof. Its thrust follows from its weight, B = G·a_G/h_N, and grows without bound as its rise shrinks: a long flyer between a low nave and wide or high aisles would push the walls apart with many times the vault thrust. Where it would rise less than a quarter of its span, its foot is led down into the aisle roof, at most to the springing of the aisle arches, as the book allows when the section offers no more height. Where not even that gives it a quarter of its span, the aisles reach almost as high as the nave vault thrust: such a section lies outside the book’s method, and the Studio says so and computes with a flyer of a quarter rise.
Formula
Modern note
The least rise of a quarter of the span is our assumption; the book’s worked flyer rises about 5 m over some 6 m.
Sources
„so kann ein Einschneiden des Strebebogens in das Seitenschiffsdach oder selbst ein Hinabführen auf die Anfänge der Seitenschiffsgurten nötig werden“
“the flyer may then have to cut into the aisle roof or even be led down to the springing of the aisle arches”
Ungewitter 1892, p. 401 (scan), Fig. 912
Where implemented
@ungewitter/model#flyerFoot, crossSection