RulePortals
Portal filling the bay between buttresses
portal.buttress-fill
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
Great portals, like windows, fill the whole width between the buttresses, the jamb running beyond the outer wall face to them. Four cases follow from the buttresses against bay and portal width: (1) the stepped or splayed jamb reaches the buttress fronts; (2) it would fall short because the buttresses project too little, so the buttresses are widened up to the gable or the jamb is interrupted by a plain wall piece, the arches of the parts then need not be concentric; (3) it meets the buttress sides well inside their corners, so the buttresses project strongly; (4) as 3, with a barrel vault between the buttresses (Châlons, Amiens), the column systems continuing on their sides and fronts. A deeper portal is had by lengthening the buttresses, the splay continuing into the lengthening, which then ends in turrets above the springing. French triple portals form their own storey at aisle height; German buttresses run down independently and separate the portals.
Parameters
- cases.1
- reachesFront
- cases.2
- fallsShort
- cases.3
- meetsSideInside
- cases.4
- barrelBetweenButtresses
- case2Remedies
- widenButtressesToGable, plainWallPiece
Sources
„Es sind hier je nach dem Verhältnis der Strebepfeiler zu der ganzen und zu der Portalweite vier Fälle möglich“
“Four cases are possible here, depending on the relation of the buttresses to the whole width and to the portal width”
Ungewitter 1892, p. 553 (scan), Fig. 1313, 1313a
Ungewitter 1892, p. 554 (scan), Fig. 1313b, 1314, 1315
Where implemented
Not implemented yet.