Glossary termStatics
thrust
Schub
The outward, generally inclined force that an arch or vault exerts on its supports because it carries load by compression along a curve.
Names
- English
- thrust
- German
- Schub
- French
- poussée
Sources
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 2: Pointed or round?
- Lesson 5: Holding back the thrust
- Lesson 6: The flying buttress
- Lesson 7: Hall church or basilica?
- Lesson 8: Ending the choir
- Lesson 10: Rules of thumb across the centuries
- Lesson 13: How safe is safe? Heyman’s geometric factor
- Lesson 14: The cracked buttress
- Lesson 15: The flyer’s range of thrust
- Lesson 18: Towers and spires
- Lesson 19: Thrust networks
- Lesson 20: Reading a cathedral
- Lesson 22: Cutting the stone
Rules that mention it
- Balancing thrusts by surcharging the transverse arch
- Middle pier of a hall church
- Line of thrust (Stützlinie)
- The most favourable line of thrust
- Limiting lines of thrust
- Vault thrust at the chevet corners
- The intermediate pier of a double span
- Heights and flyers of the stepped five-aisled section
- Five-aisled churches: three systems
- The buttress receiving the flyers
- The arch line of the flyer
- Flyer thrust from the pier centre
- Hall church: heights, piers and buttresses
- Six ways to form the upper wall
- Height of the vault thrust
- Wall thickness by the moment equation
- Angle between the thrust and the joint normal
- Range of thrust of an arch
- Buttress against overturning: minimum depth and geometric factor
- The flyer’s range of thrust
- The arch on leaning buttresses
- The leaning buttress
- The arch on spreading supports
- The safe theorem of masonry
- Estimated range of a vault’s thrust
- Crushing hardly governs
- Round core wider than the arcade arch
- Corner buttresses
- Middle pier by vertical load
- Full wall without buttresses
- Target factor of a buttress, cracked
- Both flights of a double span against the vault
- The Studio’s flyer against the vault
- Resultant of the thrusts on an arc
- Forces per metre in a masonry cone
- Tension ring at the foot of a cone
- Longitudinal compression and thrust of a cone
- Ring force of curved spires and domes
- Forces in octagonal stone spires
- Chain of resultants through a basilica section
- Iron ties
- Certified thrust extremes of the course pattern
- TNA horizontal equilibrium and the force diagram
- Mesh band of the thrust range (Richardson, grid convergence index)
- Table I recomputed by TNA
- Least and greatest thrust of a vault bay
- TNA vault model: surface, loads and envelope
- Vault thrust by moments
- Thrust on a corner abutment
- Vault weight and thrust per square metre of plan (Table I)
- Wind on roofs
- Springer beds: horizontal, or radial in front
- Buttress depth from the statics
- Transverse section and its load cases
- The thrust through a double span in the statics
- The flyers over doubled aisles in the statics
- Least rise of the flyer in the statics
- The 1890 load of a late-Gothic vault
- Portal and windows of the lower storeys (TW4)
- The pointed diagonal is the norm
- Apse keyed at the polygon centre
- Keystone of a trapezoidal bay
- Unequal springing angles
- Sexpartite vault