Skip to content
Ungewitter

RuleArches

Line of thrust through the abutment

arch.abutment

treatiseimplementedUngewitter 1890 (Mohrmann)

Stated in a 19th-century treatise, above all the Lehrbuch of 1890.

Statement

The end forces of the arch's line of thrust give the oblique pressure on the abutment, in size and direction. To follow it down through a buttress, divide the buttress into horizontal courses and, for each joint, combine all the forces above it into one resultant. The curve through the points where these resultants cross the joints is the line of pressure. It should stay in the kern; if the buttress seems too weak, widen it and draw the line again.

Formula

xP=∑Vixi+∑Hi(yi−y0)∑Vi,|e|≤w/6

Sources

  • „Durch Konstruktion der Stützlinie … gewinnt man das klarste und zuverlässigste Bild von dem Verlauf der Druckspannungen im Gewölbe selbst, gleichzeitig liefern die Endkräfte der Drucklinien unmittelbar den schräg gerichteten Widerlagsdruck nach Grösse und Richtung.“
    “By constructing the line of thrust … one gains the clearest and most reliable picture of the course of the pressures in the vault itself; at the same time the end forces of the lines of pressure directly give the oblique abutment pressure in size and direction.”

    Ungewitter 1890, p. 129 (scan)

  • „Will man die Mittellinie des Druckes in ihrem ganzen Verlauf von oben bis unten darstellen, so nimmt man nach Art der Fig. 372 eine wagerechte Streifenteilung vor und setzt für jede Fläche alle über ihr wirkenden Kräfte zu einer resultierenden Druckkraft zusammen.“

    Ungewitter 1890, p. 141 (scan), Fig. 372

Where implemented

@ungewitter/statics#thrustLine

Tools in this area

Lessons on the same pages

Terms