RuleOther
Angle between the thrust and the joint normal
lesson.stereotomy.joint-thrust-angle
Our derivation from a construction or rule in the sources.
Statement
At every joint of an arch, compare the direction of the resultant that crosses it with the joint's normal. The stones hold against sliding while the angle stays below the angle of friction, about 30° to 45° for stone in soft mortar; a joint square to the line of thrust has the angle 0°. Lesson 22 measures radial joints, level beds and joints square to the thrust against the most favourable line of thrust of one radially jointed arch.
Formula
Modern note
The comparison of joint patterns against one line of thrust is ours: the line belongs to the radially jointed arch, and the other patterns would shift it slightly. The friction angle of 30° is the cautious end of the book's range.
Sources
„wenn der Winkel α in Fig. 251 zwischen der Richtung des Wölbschubes und der Senkrechten zur Fuge grösser als der Reibungswinkel wird“
“when the angle α in Fig. 251 between the direction of the vault thrust and the perpendicular to the joint becomes greater than the angle of friction”
Ungewitter 1890, p. 86 (scan), Fig. 251
Ungewitter 1890, p. 74 (scan), Fig. 204, 205, 206, 207
Where implemented
apps/site/src/components/lessons/StoneFigure.tsx