RuleStudio
The flyers over doubled aisles in the statics
studio.statics.flyer-double-span
Our derivation from a construction or rule in the sources.
Statement
Over doubled aisles the Studio’s 1890 statics build the system the design chooses. Single span: one flyer over both aisles to the outer buttress, as the book allows with a radius greater than their total width (Paris, Ulm); it is longer and heavier than either flight of a double span and thrusts harder, on the clerestory wall and on the buttress alike, and the Studio notes that the double span is the usual way. Double span: two flights meeting on an intermediate pier on the row between the aisles, the thrust traced through both. Stepped: the nave’s flights cross the raised inner aisles’ wall piers, and the inner aisles have flyers of their own.
Modern note
The single span is a note, not a fault: the book names it as one of its systems. The flights and piers of the other two are those of `studio.statics.double-span` and `elevation.five-aisle.stepped-heights`.
Sources
„wenn bei hohem Mittelschiff die Strebebögen über beide Seitenschiffe in einem Zuge gespannt sind, wie bei der Kathedrale von Paris und dem Ulmer Münster“
“when, with a high nave, the flyers are spanned over both aisles in one stretch, as at the cathedral of Paris and Ulm Minster”
„nach der gewöhnlicheren Weise in doppelten Spannungen geschlagen werden“
“are built, in the more usual way, in double spans”
Where implemented
@ungewitter/model#checkStatics