RuleOther
Springer beds: horizontal, or radial in front
stereotomy.springer.beds
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
Gothic springers grow out of the wall and go up with it. Inside the wall their beds are horizontal; in the projecting part they continue horizontally or turn radial. A horizontal joint may run through only if the front edge is not too acute and the thrust makes no greater angle with the joint normal than the friction angle, about 30° to 45° for stone in soft mortar, more in hardened mortar; otherwise turn the joint radial.
Formula
Parameters
- friction_deg
- 30 – 45
Sources
„fest mit der Mauer verwachsen“
“firmly grown together with the wall”
Ungewitter 1890, p. 85 (scan), Fig. 249, 250
„Bei Stein und weichem Mörtel etwa 30° bis 45°, bei erhärtetem Mörtel mehr.“
“With stone and soft mortar about 30° to 45°, with hardened mortar more.”
Ungewitter 1890, p. 86 (scan), Fig. 251
Ungewitter 1890, p. 105 (scan), Fig. 296
Where implemented
@ungewitter/gothic#archStones