Wall thickness by the moment equation
elevation.wall.thickness-check
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
The outer wall is checked on the joint above the plinth in three cases: A without wind (wall masses, vault reaction V and thrust H), B the windward wall (with roof wind D′, minus wall wind W and roof wind S′), C the leeward wall (with D″ and S″). The pressure point X follows from moments about the inner face, then kern and edge pressure. Beispiel I: a full 1.50 m wall; Beispiel II: a 1.00 m wall with buttresses needs about ⅔ of the masonry.
Formula
Sources
„Die Kirche hat 10 m lichte Weite bei 6 m Jochteilung und 20 m Mauerhöhe über dem Sockel“
“The church is 10 m wide in the clear, with 6 m bays and 20 m of wall above the plinth”
Ungewitter 1892, p. 335 (scan), Fig. 835
Ungewitter 1892, p. 336 (scan), Fig. 835a
„die volle Wand erfordert aber etwa die 1½fache Masse“
“but the full wall needs about 1½ times the mass”
Where implemented
@ungewitter/gothic#wallThicknessCases