Glossary termVaults
springer
Gewölbeanfang
The lowest courses of a vault, where several ribs rise from one capital or corbel. They are laid in horizontal beds bonded into the wall (tas-de-charge) until the ribs separate.
Names
- English
- springer also tas-de-charge, springing (Ricker)
- German
- Gewölbeanfang also Anfänger, Gewölbanfang (1890), Rippenanfang
- French
- tas-de-charge
Sources
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 2: Pointed or round?
- Lesson 4: Ribs and the cross vault
- Lesson 5: Holding back the thrust
- Lesson 10: Rules of thumb across the centuries
- Lesson 11: Drawing tracery
- Lesson 17: Star and net vaults
- Lesson 20: Reading a cathedral
- Lesson 21: Late-Gothic vaults: tiercerons, liernes, nets, fans
- Lesson 22: Cutting the stone
Rules that mention it
- Viollet-le-Duc's thirds rule
- Heights and flyers of the stepped five-aisled section
- Limits of stilting
- Height classes of the single vessel
- Lacher’s right height
- Six pleasing relations of height to width
- The upper wall of the buttressed basilica
- Six ways to form the upper wall
- Height of the vault thrust
- Window under the wall rib
- The arch on leaning buttresses
- The leaning buttress
- The arch on spreading supports
- Canopies and pedestals
- Crushing hardly governs
- Pier types
- Portal filling the bay between buttresses
- Capital band: separating arch from jamb
- Ogee portal gable (Eselsrücken)
- Hood moulding and returned courses
- Jamb figures: mounting and minimum size
- Door opening: rectangular, sized by use
- Pinnacles beside the portal gable
- TNA form diagram: courses between the ribs
- TNA horizontal equilibrium and the force diagram
- Least and greatest thrust of a vault bay
- TNA vault model: surface, loads and envelope
- Vault thrust by moments
- Vault weight and thrust per square metre of plan (Table I)
- Springer beds: horizontal, or radial in front
- Springer courses, block and tail
- Height of the springer: where the ribs part
- Unequal compartment starts
- Section and elevation of the design
- Detail of the 3D model
- The thrust through a double span in the statics
- Least rise of the flyer in the statics
- Compound (four-centred) arch
- Equal-radius system
- Principal arch
- Tierceron vault
- Ribs on the corner bisectors
- Unequal springing angles
- Regular springer
- Checks of the principal-arch construction
- Rib elevations unrolled on one principal arch