Skip to content
Ungewitter

RuleOther

Height of the springer: where the ribs part

stereotomy.springer.height

derivedimplementedUngewitter 1890 (Mohrmann)

Our derivation from a construction or rule in the sources.

Statement

At the springing the ribs are merged with each other and with the wall; they part only at the height at which each has travelled far enough horizontally. Lay the side view of a rib into the plan: at the plan point d where the ribs separate raise a vertical; it meets the rib back in e, and the horizontal through e is the top of the springer. Computed here from the horizontal sections of the rib profiles (Willis): the section line δ above the nose lies at u = c − √((r + δ)² − (z − z_c)²) along the rib, and the top is the lowest height above which no two neighbouring sections overlap.

Formula

ztop=√((R+h)2−(R−d)2)fortworectangularribsb×honarcsofradiusRatθ,d=(b/2)·cot(θ/2)

Modern note

Willis (1842) drew the horizontal sections of the tas-de-charge course by course; the closed form above is our derivation from the construction of Fig. 269 for the simplest case and is the test fixture of the implementation.

Sources

  • „trennen sich erst in derjenigen Höhe von einander, in welcher die Rippen den hierzu erforderlichen Weg in horizontaler Richtung zurückgelegt haben“
    “separate from each other only at that height at which the ribs have covered the necessary distance in the horizontal direction”

    Ungewitter 1890, p. 87 (scan), Fig. 256, 257

  • „Eine Horizontale durch e giebt die Höhe des Werkstückes an“
    “A horizontal through e gives the height of the stone”

    Ungewitter 1890, p. 90 (scan), Fig. 269, 269a

  • Ungewitter 1890, p. 91 (scan)

  • Willis 1842

Where implemented

@ungewitter/gothic#springer

Lessons on the same pages

Terms