RuleVaults
Principal arch
vault.elevation.principal-arch
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
The heights of all ribs of a rich vault are taken from one principal arch by laying off plan lengths along it: (b) from the crown outward, so that all keys lie on the sphere; (b′) from the springing, which gives regular springers and side keys almost at crown height; or (c) over the unrolled length of the longest continuous rib train, every piece taking its own segment. Method (c) gives high crowns and must not be used on nets without a continuous diagonal, where keys would sag inward.
Formula
Modern note
Node heights here follow one admissible reading of the method per pattern; the book fits arcs by eye and adjusts key heights (EL1).
Sources
Ungewitter 1890, p. 35 (scan), Fig. 87
Ungewitter 1890, p. 65 (scan), Fig. 147
Ungewitter 1890, p. 66 (scan), Fig. 148, 149, 150
Ungewitter 1890, p. 67 (scan), Fig. 151
Where implemented
@ungewitter/gothic#principalPiece