RuleStatics
TNA form diagram: courses between the ribs
statics.tna.form-diagram
Our derivation from a construction or rule in the sources.
Statement
The plan of a rib-vault bay becomes a form diagram (Block & Ochsendorf 2007). The ribs run as bars from each springer to the keystone. Each compartment, the triangle between two neighbouring ribs and its boundary arch, is cut into courses parallel to the boundary arch, each spanning from rib to rib; the outermost course is the boundary arch itself. This is the book’s own reading of the web: strips that bear on the ribs which carry them. Courses are subdivided more finely towards the ribs, where they are steepest. Supports are the springers.
Parameters
- levels
- 8
- segment_spacing_of_longest_arch
- 0.0833
Modern note
Because forces run only along the courses and the ribs, the pattern is the three-dimensional form of the slicing technique. It cannot show shell action across the courses, which a denser diagram (cross or fan patterns, Maia Avelino et al. 2021) would allow; its least thrust is therefore an upper estimate of the true least thrust.
Sources
„Die Zerlegung der Kappen in einzelne Streifen … nunmehr handelt es sich darum, die zweckmässige Krümmung eines solchen Kappenstreifen festzustellen und den Widerlagsdruck, den er auf die ihn tragende Rippe ausübt.“
“The division of the webs into single strips … what matters now is to fix the suitable curvature of such a web strip and the abutment pressure it exerts on the rib that carries it.”
Where implemented
@ungewitter/statics#courseNetwork