Glossary termStatics
kern
Kern
The region of a cross-section within which a compressive resultant produces compression over the whole section. For a rectangle it is a rhombus whose diagonals are one third of the sides; along one axis this is the middle third.
Names
- English
- kern also core of the section
- German
- Kern also Kern des Querschnittes (1890), Querschnittskern
- French
- noyau central
Sources
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 5: Holding back the thrust
- Lesson 6: The flying buttress
- Lesson 7: Hall church or basilica?
- Lesson 13: How safe is safe? Heyman’s geometric factor
- Lesson 14: The cracked buttress
- Lesson 15: The flyer’s range of thrust
- Lesson 20: Reading a cathedral
Rules that mention it
- Middle pier of a hall church
- Direct sizing of a prismatic buttress
- Sizing by tracing the line of pressure
- Required abutment dimensions (Tables 2–4)
- Line of thrust through the abutment
- Pressure on a joint
- Line of thrust in the middle third
- Limiting lines of thrust
- The buttress receiving the flyers
- Wall thickness by the moment equation
- Lab arch: modelling assumptions
- Geometric factor of safety
- Range of thrust of an arch
- The cracked buttress
- Buttress against overturning: minimum depth and geometric factor
- 1890 against modern statics
- The flyer’s range of thrust
- Buttress depth by the modern criterion
- Target factor of a buttress, cracked
- Both verdicts on every support
- Joint factor of piers and clerestory walls
- Edge pressure
- Middle-third (kern) rule
- Vault thrust by moments
- Sway of the resultant under wind
- Buttress depth from the statics
- Storm as a rare load
- Kern of hollow tower sections