RuleAbutment
Required abutment dimensions (Tables 2–4)
abutment.size.tables
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
Wall thickness (Table 2, half the wall length open), plain rectangular buttress length (Table 3, breadth half the length) and tapered buttress base length (Table 4, top 5/11, breadth 4/11), for 4×4 and 8×8 m vaults, heights of 5/4 and 2½ spans and the limit for any height, in ashlar or brick, with the resultant through the edge (never to be approached), the kern limit (sufficient) or the centre. Only the vault thrust is covered; add for wind on high roofs.
Parameters
- interpolation
- span 4–8 m at constant t/s; s/t between 5/4 s, 2½ s and ∞; rise ratio; web type by Table I thrust [derived]
- reproduction
- 1062 of 1080 cells within ±0.05 m by the §3.6 moment equation; the other 18 are flagged suspect (8 in the extraction, 10 by the reproduction), see abutment.size.tables-suspect
Sources
„untere Grenzwerte, denen man sich nicht nähern darf, da Widerlager dieser Stärke (ohne Zugfestigkeit) unbedingt umstürzen würden“
Where implemented
@ungewitter/statics#lookupAbutmentTable