Skip to content
Ungewitter

RuleStatics

Middle-third (kern) rule

statics.joint.kern

treatiseimplementedUngewitter 1890 (Mohrmann)

Stated in a 19th-century treatise, above all the Lehrbuch of 1890.

Statement

The line of pressure should stay within the kern of every joint (for a rectangle, its middle third), so that the whole joint is in compression; small excursions are tolerable in good ashlar if the edge pressure stays within the allowable stress. Kern limit w = J/(F·z); rectangle h/6, circle D/8, square on the diagonal d/12, triangle h/6 toward the apex and h/12 toward the base.

Formula

w=J/(Fz),|e|≤b/6(rectangle)

Modern note

Heyman showed that stability, not stress, governs masonry; the kern rule implies a geometric safety factor of about 3 (epic 2).

Sources

Where implemented

@ungewitter/statics#sectionProps, kernLimit, neutralAxis, edgePressure

Tools in this area

Lessons on the same pages

Terms