Glossary termGeneral
ground plan
Grundriss
A horizontal section through a building, usually just above the floor, showing walls, supports and the vault pattern projected onto it.
Names
- English
- ground plan also plan
- German
- Grundriss
- French
- plan
Sources
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 2: Pointed or round?
- Lesson 3: The bay
- Lesson 4: Ribs and the cross vault
- Lesson 5: Holding back the thrust
- Lesson 7: Hall church or basilica?
- Lesson 9: The chevet
- Lesson 10: Rules of thumb across the centuries
- Lesson 12: Mouldings, gables and portals
- Lesson 16: Proportion: documented and disputed
- Lesson 17: Star and net vaults
- Lesson 19: Thrust networks
- Lesson 20: Reading a cathedral
- Lesson 21: Late-Gothic vaults: tiercerons, liernes, nets, fans
- Lesson 23: Roriczer’s pinnacle
Rules that mention it
- Line of thrust (Stützlinie)
- Amiens chevet
- Twin west towers
- The intermediate pier of a double span
- Canopies and pedestals
- Finial (Kreuzblume): tiers from the quadrature
- Mouldings at corners and intersections
- Stacked pinnacle bodies and their height limit
- Figure shrines on buttresses (Gehäuse)
- Figurative wall pictures, placed freely
- Brick piers from the bond
- Abacus height
- Abacus and bell rim
- Body 6A high (B1–B2)
- Blind panel of the body (B6–B10)
- Plinth and water table (B3–B5)
- Crockets (C1–C5)
- Gable: coping profile (W6)
- Gable: dividing the finial (W5)
- Gablets at 4A/3 (G1–G10)
- Plan: the centre line (P16)
- Plan: the crocket figure (P10–P15)
- Plan: the blind panel (P6–P9)
- Plan: three nested squares (P1–P5)
- Riese 7A high (R1–R4)
- The whole pinnacle, 1 : 13 (A1)
- Buttress rule of the earlier editions
- Archivolts: concentric rings on the jamb orders
- Figures and canopies in the arch rings
- Capital band: separating arch from jamb
- Continuous splay and jamb depth
- Stepped jamb: orders and step size
- Porches between buttresses and larger porches
- Ring force of curved spires and domes
- Roof dead load
- Snow load
- Certified thrust extremes of the course pattern
- TNA form diagram: courses between the ribs
- Vault weight and thrust per square metre of plan (Table I)
- Shafts bonded or on end
- Height of the springer: where the ribs part
- Coursing systems of the web
- A chevet as the end of the choir
- Section and elevation of the design
- Portals of the design
- Towers of the design
- Tracery of a window class
- Vaulting the bays of the plan
- Late-Gothic vaults in the plan
- The 1890 load of a late-Gothic vault
- Corner turrets on the buttresses (C5)
- Principal arch
- All ribs on a sphere
- Keystone of an irregular bay
- Cell vault
- Ribs curved in plan
- Fan vault
- Looped ribs (Schlingrippen)
- Parallel-rib net (Parler)
- Regular springer
- Rib elevations unrolled on one principal arch