Glossary termGeneral
section
Querschnitt
A drawing of a building cut by a vertical plane, usually across the vessels (cross-section) or along the axis (longitudinal section).
Names
- English
- section also cross-section, longitudinal section
- German
- Querschnitt also Schnitt, Durchschnitt (1890), Längsschnitt
- French
- coupe
Sources
Related terms
Used in
Lessons
- Lesson 1: Why arches stand
- Lesson 5: Holding back the thrust
- Lesson 6: The flying buttress
- Lesson 7: Hall church or basilica?
- Lesson 11: Drawing tracery
- Lesson 14: The cracked buttress
- Lesson 15: The flyer’s range of thrust
- Lesson 16: Proportion: documented and disputed
- Lesson 20: Reading a cathedral
- Lesson 21: Late-Gothic vaults: tiercerons, liernes, nets, fans
Rules that mention it
- Heights and flyers of the stepped five-aisled section
- The coping as wind strut
- The arch line of the flyer
- Depth of the flyer ring
- Triforium section
- Height of the vault thrust
- The cracked buttress
- 1890 against modern statics
- Buttress offsets
- Pear moulding (Birnstab)
- Rib profiles: middle period
- Rib profiles: late period
- Roll (Rundstab)
- Corbel: shear
- Lintel on corbels
- Trumeau (middle pier)
- Target factor of a buttress, cracked
- Both verdicts on every support
- Joint factor of piers and clerestory walls
- Geometric factor of a vault, read on its equivalent arch
- Crowning stones against wind
- Least weight of an unanchored timber spire
- Wind on towers and spires
- Chain of resultants through a basilica section
- Edge pressure
- Overturning about a tipping edge
- Height of the springer: where the ribs part
- Templates on the bed or head joint
- Coursing systems of the web
- Section and elevation of the design
- Transverse section and its load cases
- Least rise of the flyer in the statics
- Kern of hollow tower sections
- Body of equal stress
- Old and young mullions (K1)
- Mullion section (M2, C0)
- Fan vault
- Rib cross-section
- Regular springer