Skip to content
Ungewitter

RulePortals

Lintel on corbels

portal.lintel

treatiseimplementedUngewitter 1890 (Mohrmann)

Stated in a 19th-century treatise, above all the Lehrbuch of 1890.

Statement

Two corbels projecting from the jambs shorten the free span of the lintel to great advantage without reducing the usable opening; they may join the jamb capitals by a one-sided enlargement, project from the plain reveal, or be wrapped by the jamb moulding. Lintel and rebate need only 30 to 40 cm depth through the wall, even for large doors. Romanesque and early Gothic lintels in Lower Saxony and on the Rhine are thickened at mid-span; at Sinzig an open joint is left above the lintel. Corbel and lintel proportions are measured on Fig. 1284 (corbel about 0.12 W projection and 0.2 W height, lintel about 0.27 W high); corbel sizing follows Part I: the section at the wall face in cm² at least equals the load in kg, projection to height 1:1 to 1:2.

Formula

lfree=W−2p,p≈0.12W,Awall[cm2]≥Q[kg]

Parameters

depthThroughWall_cm
30 – 40
measuredFig1284.corbelProjectionToW
0.12
measuredFig1284.corbelHeightToW
0.21
measuredFig1284.lintelHeightToW
0.27
measuredFig1284.freeSpanToW
0.8
corbelProjectionToHeight
1 – 0.5

Sources

Where implemented

@ungewitter/gothic#portalLayout

Tools in this area

Terms