RuleMouldings
Brick mouldings
moulding.brick
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
Rich brick mouldings use moulded bricks inscribed in the normal brick format, with as few types as possible and no sharp re-entrant angles. Drips and undercuts are limited to the height of one flat or rowlock course and omitted under overhanging roofs; brick main cornices use arched friezes and plates instead of large hollows. A brick profile needs a minimum size to read against the wall colour, outer rims keep at least 3 cm, and the whole profile follows the bond: right-angled steps of brick width or half length, hollow centres on the extension of the head joints; jamb bricks need length : width = 3 : 2 (Fig. 960) or 5 : 2 (Fig. 958).
Formula
Sources
„Abtropfprofile oder Unterschneidungen sind auf die Höhe einer Flachschicht oder Rollschicht beschränkt“
“Drip profiles or undercuts are limited to the height of a flat course or rowlock course”
Ungewitter 1892, p. 430 (scan), Fig. 950, 950a, 951, 952, 953, 954, 955, 956, 957, 959
Ungewitter 1892, p. 431 (scan), Fig. 958, 960
Where implemented
Not implemented yet.