RuleMouldings
Base course (Sockel)
moulding.base-course
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
The plinth only leads the wall load onto a wider base and covers the projection; a plain slope of 45° or steeper, or a weathering, suits both and is used even on rich buildings. A flat curved slope expresses the spread of load, its lower edge chamfered; a remnant of the weathering may separate the hollow from the wall to mark the stone. Romanesque and early Gothic plinths often have a hollow over a roll. Profiles that hold water in a raised rim are better avoided. Important works use two stones with two mouldings separated by a vertical plate whose height sets the character.
Sources
„er hat nur den Druck der oberen Mauermasse auf eine breitere Basis zu leiten und den dadurch entstehenden Vorsprung abzudecken“
“it only has to lead the pressure of the wall above onto a wider base and to cover the projection thus formed”
Ungewitter 1892, p. 444 (scan), Fig. 1022, 1023, 1024, 1024a, 1025, 1025a
Ungewitter 1892, p. 445 (scan), Fig. 1026, 1027, 1028, 1029
Where implemented
@ungewitter/gothic#courseProfile