RuleVaults
Tunnel-form rhomb net
vault.late.rhomb-net
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
In the long net vault both diagonal and transverse ribs vanish; ribs from the piers interweave over the whole vault in rhomb-shaped meshes, and the wall triangles are cut in as lunettes. Nets are called one-, two- or three-mesh by the number of meshes across the width. Here every rib runs straight through the piers of both walls, crossing the vessel while it advances m + 1 bays, which gives m meshes across.
Modern note
The straight lattice through the piers is our reading of Figs 84–85; Fig. 86 removes some oblique pieces and inserts short transverse ones, which is not modelled.
Sources
„Je nach der Zahl der in der Wölbbreite nebeneinander gereiheten Felder, unterscheidet man ein-, zwei-, dreimaschige Netzgewölbe usf.“
“By the number of meshes set side by side across the width of the vault one distinguishes one-, two-, three-mesh net vaults and so on.”
Ungewitter 1890, p. 35 (scan), Fig. 84, 85, 86
Where implemented
@ungewitter/gothic#patternNet