Skip to content
Ungewitter

RuleTowers

Setbacks and wall reduction per storey

tower.elev.setbacks

assumedimplementedUngewitter 1890 (Mohrmann)

Our default where the sources give a range or say nothing.

Statement

The walls are set back storey by storey on the outside, so the outer face recedes while the clear width stays; the buttresses step back with them. The book gives the principle (masses growing downward, p. 624; buttresses stepping out downward, p. 628) but no figure for the step. The generator reduces the wall by a chosen fraction of the ground wall per storey (default 0.12, assumed), never below 0.3 m or 0.04 of the tower side, and lets the buttresses shrink evenly from a quarter of the side at the ground to the top of the belfry (assumed).

Parameters

setbackRatio
0.12
minWall
0.3
buttressDepthAtGround
0.25

Sources

  • Ungewitter 1892, p. 576 (scan)

  • Ungewitter 1892, p. 624–625 (scan)

  • „Erbreitern sich die Wände dagegen allmählich nach aussen oder liegen ihnen Strebepfeiler vor, die staffelförmig nach unten vorspringen, so können die Massen des Widerlagers erheblich eingeschränkt werden“
    “If, on the other hand, the walls widen gradually outward, or buttresses stand before them that step out downward, the masses of the abutment can be much reduced”

    Ungewitter 1892, p. 628 (scan)

Where implemented

@ungewitter/gothic#towerModel

Tools in this area

Terms