RuleMouldings
Projection and height of courses
moulding.cornice.projection
Stated in a 19th-century treatise, above all the Lehrbuch of 1890.
Statement
Most course profiles have a projection equal or nearly equal to their height. The projection can be increased at constant height by lengthening the hanging part and adding a tangent hollow (Haina), by a roll or ogee roll on the chamfer, by a pointed-arch hollow (Mühlhausen), by cutting the profile from the horizontal underside only, or by a flatter weathering. Lacher’s rule puts all cornices at about 1/5 or 1/6 of the wall thickness; the eaves cornice should project more than the sill course.
Formula
Sources
„Die meisten der seitherigen Profile zeigten ganz oder nahezu die Ausladung der Höhe gleich“
“Most of the profiles so far showed the projection wholly or nearly equal to the height”
Ungewitter 1892, p. 441 (scan), Fig. 1003, 1004, 1005, 1006, 1007
Ungewitter 1892, p. 343 (scan), Fig. 841
Where implemented
Not implemented yet.