RuleMouldings
Pointed and keeled roll
moulding.keel
Our derivation from a construction or rule in the sources.
Statement
A roll of two arcs whose centres lie on the horizontal diameter at ±e from the axis, each struck from the far centre, meets in an arris on the axis like a pointed arch (Fig. 944 a; Part I Fig. 178, already in the earliest period). A keel (Schneide) is formed by two faces tangent to the roll at ±45°, meeting in a right-angled arris at r·√2 below the centre (Part I Fig. 180); it came before the fillet. Measured centre offsets: e ≈ 0.35 of the half width in Fig. 944 a, ≈ 0.17 in Part I Fig. 178.
Formula
Modern note
The centre offsets are measured off the figures; the book gives the forms, not the numbers.
Sources
„kantig zusammengesetzte Stäbe“
“angularly composed rolls”
Ungewitter 1892, p. 428 (scan), Fig. 944, 945
„Die aus zwei gegen einander gerichteten Flächen gebildete Schneide Fig. 180 trat zuerst auf“
“The arris formed by two faces turned against each other, Fig. 180, appeared first”
Ungewitter 1890, p. 69 (scan), Fig. 178, 180
Where implemented
@ungewitter/gothic#ProfileLine