Skip to content
Ungewitter

RuleMouldings

Gable crowning: stem and knob (Fig. 1049)

moulding.gable-finial

treatisependingUngewitter 1890 (Mohrmann)

Stated in a 19th-century treatise, above all the Lehrbuch of 1890.

Statement

Worked example: a gable whose height equals its base, coping one eighth of the base. The width ef of the stone that carries the stem sets the projection of the knob; the lower stem width comes from extending al to the gable side at m, the upper from one third of ik; the stem height ei is 1½ to 2 times ef, the knob height from half to the whole side of the square over ik. The knob stays within the verticals through e and f and behind the gable face. The crowning must not be scaled from the gable height; the relation is almost inverse. Polygonal stems and knobs are preferable to square ones.

Formula

hg=B, hc=B/8; HStengel=(1.5…2)ef; boben=ik/3; HKnauf=(0.5…1)ik

Sources

  • „Eine Entwickelung der Höhe der Bekrönung aus der des Giebels ist unstatthaft, es findet fast ein umgekehrtes Verhältnis zwischen beiden statt“
    “Deriving the height of the crowning from that of the gable is inadmissible; there is almost an inverse relation between the two”

    Ungewitter 1892, p. 451 (scan), Fig. 1048, 1049, 1049a, 1049b, 1049c, 1049d

  • Ungewitter 1892, p. 472 (scan), Fig. 1084f

Where implemented

Not implemented yet.

Tools in this area

Terms