Skip to content
Ungewitter

RuleMouldings

Fillet (Plättchen, Leiste)

moulding.fillet

derivedimplementedUngewitter 1890 (Mohrmann)

Our derivation from a construction or rule in the sources.

Statement

The fillet is a narrow flat face. On ribs it runs along the underside of the roll as a projecting strip (Part I Fig. 181), from the 13th century more common than the arris, and later spreads to the other rolls, to shafts and to mullions. In Roriczer’s pinnacle the body moulding is a quarter circle with its fillets. The book gives no general fillet width; the default here, 0.25 of the roll diameter projecting 0.1 of the diameter, is measured off Fig. 181.

Formula

bLeiste≈0.25D,v≈0.1D

Modern note

Fillet width and projection are our measured defaults.

Sources

  • „bald folgte ihr aber die vorgezogene Leiste Fig. 181, welche dann häufiger zur Verwendung kommt“
    “but it was soon followed by the projecting fillet of Fig. 181, which then comes into more frequent use”

    Ungewitter 1890, p. 69 (scan), Fig. 181

  • Ungewitter 1890, p. 70 (scan)

  • „Viertelkreis nebst sich daran setzenden Plättchen“
    “quarter circle with the fillets attached to it”

    Ungewitter 1892, p. 459 (scan), Fig. 1067

Where implemented

@ungewitter/gothic#ProfileLine

Tools in this area

Lessons on the same pages

Terms