Skip to content
Ungewitter

← All reference buildings

York Minster

York · · Wikidata Q252575

6 measured · 4 published · 2 derived · 7 provisional

The widest Gothic nave in England, and never vaulted in stone: its high vault is of timber (renewed after the fire of 1840), so its buttresses are slight for the span. The articles disagree on its height (27–32 m).

Facts

Main building campaign
1230–1472 provisionalen Wikipedia, revision 1382696056Infobox: Gothic church built c. 1230-1472.
Plan type
Basilica, 3 vessels, with transept provisionalde Wikipedia, revision 269545957Three-aisled nave with triforium; nave has wooden vault, aisles stone.
Material
stone provisionalen Wikipedia, revision 1382696056en: magnesian limestone from Tadcaster.
Nave bays
8 derivedDehio & von Bezold, Tafel 425, Fig. 1Counted on the plan, the western tower bay included.
Choir ending
flat east end derivedDehio & von Bezold, Tafel 425, Fig. 1Aisled choir with a flat east end, read on the plan.
Towers
de: crossing and west towers 65 m; fr: west towers 53 m, lantern 60 m; en: central tower 235 ft. provisionalde Wikipedia, revision 269545957
Vaults
Nave: tierceron publishedDehio & von Bezold, Tafel 425, Fig. 1A tierceron vault with a ridge rib, built in timber.
Vaults
Aisles: quadripartite publishedDehio & von Bezold, Tafel 425, Fig. 1
Vaults
Choir: lierne publishedDehio & von Bezold, Tafel 425, Fig. 1Lierne vaults in the choir, the crossing and the transepts.
East end
flat east end, no ambulatory publishedDehio & von Bezold, Tafel 425, Fig. 1
Towers in plan
two west towers, a crossing tower provisionalen Wikipedia, revision 1382696056en: a central tower and two towers at the west front.
Flying buttresses
none provisionalDehio & von Bezold, Tafel 428, Fig. 1The section of the transept shows no flyers; the nave’s vault is of timber. No nave section is on the plates.

Dimensions

DimensionsValueConventionSource
Nave width16.45 m ± 0.2 mNave piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (505, 966) to (505, 1176.5) px; scale 40 m = 512 px
Other figures
Aisle widths8.63 m ± 0.2 mNorth aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (505, 855.5) to (505, 966) px; scale 40 m = 512 px
Bay length7.93 m ± 0.1 mNave pier axes over 4 baysaxis to axismeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (404.5, 970) to (810.5, 970) px; scale 40 m = 512 px · over 4 bays
Nave vault height32 mconvention not statedprovisionalde Wikipedia, revision 269545957

Main vessel 32 m high (overview paragraph).

Other figures
Piers2.19 m ± 0.2 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (505, 1162.5) to (505, 1190.5) px; scale 40 m = 512 px
Buttress depths3.91 m ± 0.2 mNave buttress, outer face to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (502, 805.5) to (502, 855.5) px; scale 40 m = 512 px
Wall thicknesses0.94 m ± 0.2 mAisle wall beside the buttressoverallmeasuredDehio & von Bezold, Tafel 425, Fig. 1measured from (530, 843.5) to (530, 855.5) px; scale 40 m = 512 px

The design in plan

Plan of the design made from York Minster: tierceron nave vaults, flat east end, no ambulatory.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of York Minster: nave 16.45 m between pier axes, buttress depth 3.91 m; dashed outline of Amiens Cathedral for comparison.16.45 m3.91 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave with tiercerons), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress3.91 m measured2.82 m3.17 m
Building ÷ this depth–1.381.23
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked2.47 against 2: safe1.78 against 2: stands, small margin2 against 2: safe
Pier (1890 plan rule)2.19 m2.23 m–
Wall between the buttresses (1890 plan rule)0.94 m1.58 m–

Forces at the springing of the nave vault, 22.45 m above the floor.

Why they differ

  • The building is deeper than the statics asks: its builders sized the buttresses by rules of proportion and by the needs of the building site (centering, scaffolds, standing before the vaults were closed), not by the finished thrust alone.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 14.26 m, springing at 22.49 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 14.26 m + 0.05 · 22.49 m) · 0.862 = 3.7 m3.7 m11.45 m3.09
HoffstadtD = 14.26 m / 10 + √2 · 14.26 m / 10 = 3.44 m3.44 m11.45 m3.32
Viollet-le-DucD = 9.9 m · (1 − cos(2 · 73.7 ° / 3)) = 3.43 m3.43 m11.45 m3.34
HaseD = 3.43 m + 0.15 m · 22.49 m / 4.5 m = 4.18 m4.18 m11.45 m2.74
Earlier editionsD = (9.9 m + 0.3 m) / cos(37.1 °) − 9.9 m = 2.89 m2.89 m11.45 m3.96

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.22.

QuantityValue
Vault thrust per bay (estimate, Table I)67 kN
Height of the thrust (springing)22.49 m
Buttress depth (measured)3.91 m
Buttress breadth (assumed: half the depth)1.96 m
Thrust it holds: block | cracked359 | 120 kN
Minimum depth: block | cracked2.23 | 3.22 m
GSF on depth: block | cracked1.75 | 1.22
Fracture height22.49 m
1890: base joint, eccentricity ÷ kern0.56

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.