Skip to content
Ungewitter

← All reference buildings

St Stephen’s Cathedral, Vienna

Vienna · Stephansdom · Stephansdom, Wien · Wikidata Q5943

6 measured · 5 published · 1 derived · 7 provisional

Two kinds of hall in one church: the Albertine choir (1304–1340) is a true hall of three vessels at 22.4 m, the nave a staggered hall whose central vessel rises to 28 m without a clerestory. The dimensions marked “choir” were measured on the hall choir.

Facts

Main building campaign
1359–1474 provisionalde Wikipedia, revision 272193414Gothic nave/south tower campaign: tower founded 1359; lost 1474 tablet marked completion (after Böker, Der Wiener Stephansdom, pp. 162-175).
Plan type
Hall church, 3 vessels, with transept provisionalde Wikipedia, revision 272193414Three vessels; nave called pseudo-basilica, choir a hall.
Hall
aisles a little lower than the nave, without a clerestory (Staffelhalle) provisionalde Wikipedia, revision 272193414Article says Pseudobasilika: high vault above aisle vaults, windowless upper walls.
Material
stone provisionalde Wikipedia, revision 272193414de: calcareous sandstone; most wall ashlars of the choir from Mannersdorf.
Nave bays
4 provisionalde Wikipedia, revision 272193414Four square nave bays; outer wall with intermediate pier, ten vault cells.
Choir ending
5/8: 5 sides of a 8-sided polygon publishedDehio & von Bezold, Tafel 451, Fig. 6
Towers
South tower 136.44 m; unfinished north tower 68.3 m; Heidentürme 66.3 and 65.3 m. provisionalde Wikipedia, revision 272193414
Vaults
Nave: net publishedDehio & von Bezold, Tafel 451, Fig. 6Net vaults in all three vessels of the hall nave and in the transept.
Vaults
Choir: quadripartite publishedDehio & von Bezold, Tafel 451, Fig. 6The hall choir (1304–1340) is quadripartite.
East end
apse, no ambulatory publishedDehio & von Bezold, Tafel 451, Fig. 6Three apses of the hall choir.
Towers in plan
two west towers, 2 more towers publishedDehio & von Bezold, Tafel 451, Fig. 6The Romanesque Heidentürme at the west; the south tower and the unfinished north tower at the transept.
Flying buttresses
none derivedDehio & von Bezold, Tafel 451, Fig. 6A hall church: the aisle vaults abut the nave at its own height, so there are no flying buttresses.

Dimensions

DimensionsValueConventionSource
Nave width13.81 m ± 0.1 mNave piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2620, 4935) to (3031.5, 4935) px; scale 30 m = 894 px
Other figures
Aisle widths10.92 m ± 0.1 mNave aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2294.5, 4935) to (2620, 4935) px; scale 30 m = 894 px
Other figures
Bay length10.11 m ± 0.05 mNave pier axes over 2 baysaxis to axismeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2620, 4641.5) to (2620, 5244) px; scale 30 m = 894 px · over 2 bays
Other figures
Nave vault height28 mconvention not statedprovisionalde Wikipedia, revision 272193414

Main vessel height, after stephansdom.at 'Der Dom in Zahlen'.

Aisle vault heights22.4 mconvention not statedprovisionalde Wikipedia, revision 272193414

Nave aisle height, after stephansdom.at.

Piers1.98 m ± 0.1 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2590.5, 4935) to (2649.5, 4935) px; scale 30 m = 894 px
Other figures
Buttress depths5.44 m ± 0.1 mNave buttress, outer face to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2132.5, 4640) to (2294.5, 4640) px; scale 30 m = 894 px
Other figures
Wall thicknesses1.71 m ± 0.1 mNave aisle wall between the buttressesoverallmeasuredDehio & von Bezold, Tafel 451, Fig. 6measured from (2243.5, 4710) to (2294.5, 4710) px; scale 30 m = 894 px
Other figures

The design in plan

Plan of the design made from St Stephen’s Cathedral, Vienna: net nave vaults, apse, no ambulatory.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of St Stephen’s Cathedral, Vienna: nave 13.81 m between pier axes, buttress depth 5.44 m; dashed outline of Amiens Cathedral for comparison.13.81 m5.44 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave a net vault), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress5.44 m measured3.84 m3.84 m
Building ÷ this depth–1.421.42
Kern rule of 1890kern keptkern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked1.66 against 1: safe1.12 against 1: safe1.12 against 1: safe
Pier (1890 plan rule)1.98 m0.74 m–
Wall between the buttresses (1890 plan rule)1.71 m1.31 m–

Forces at the springing of the nave vault, 20.07 m above the floor.

Why they differ

  • A hall church: the buttress takes the outer aisle vault, which carries the thrust of the nave across. The building keeps a margin over the kern rule.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

A hall church: nave and aisle vaults spring at about the same height and lean on one another, so only the outer aisle vault presses on the buttresses. The rules are applied to it, as in Ungewitter’s own hall-church example.

Outer aisle vault: span 9.93 m, springing at 15.78 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = 0.222 · 9.93 m + 0.05 · 15.78 m = 3 m3 m5.44 m1.82
HoffstadtD = 9.93 m / 10 + √2 · 9.93 m / 10 = 2.4 m2.4 m5.44 m2.27
Viollet-le-DucD = 6.9 m · (1 − cos(2 · 73.7 ° / 3)) = 2.39 m2.39 m5.44 m2.28
HaseD = 2.39 m + 0.15 m · 15.78 m / 4.5 m = 2.91 m2.91 m5.44 m1.87
Earlier editionsD = (6.9 m + 0.3 m) / cos(37.2 °) − 6.9 m = 2.14 m2.14 m5.44 m2.54

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

Even cracked, the buttress is 2.58 times as deep as it needs to be to hold the estimated thrust.

QuantityValue
Vault thrust per bay (estimate, Table I)59 kN
Vault load on the buttress (estimate, Table I)187 kN
Height of the thrust (springing)15.78 m
Buttress depth (measured)5.44 m
Buttress breadth (assumed: half the depth)2.72 m
Thrust it holds: block | cracked1,030 | 524 kN
Minimum depth: block | cracked1.84 | 2.11 m
GSF on depth: block | cracked2.96 | 2.58
Fracture height12.42 m
1890: base joint, eccentricity ÷ kern0.08

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • A hall church: the outer aisle vault is taken (its span and crown), with its vertical load on the wall and buttress.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)