Skip to content
Ungewitter

← All reference buildings

Ulm Minster

Ulm · Ulmer Münster · Ulmer Münster · Wikidata Q44562

7 measured · 6 published · 7 provisional

German Late Gothic. The west tower is the reference for the spire module.

Facts

Main building campaign
1377–1890 provisionalde Wikipedia, revision 271750653Begun 1377 as a hall church, changed to a basilica after 1392, halted 1543, completed 1890.
Plan type
Basilica, 5 vessels, no transept provisionalde Wikipedia, revision 271750653
Material
brick provisionalde Wikipedia, revision 271750653de: the outer walls largely brick; all edges and most of the towers sandstone.
Choir ending
5/8: 5 sides of a 8-sided polygon provisionalDehio & von Bezold, Tafel 446, Fig. 3The end sides are splayed to meet the wider choir.
Towers
West tower 161.53 m, the tallest church tower; two choir towers of 86 m. provisionalde Wikipedia, revision 271750653
Vaults
Nave: lozenge net publishedDehio & von Bezold, Tafel 446, Fig. 3A lozenge net over the nave.
Vaults
Aisles: net publishedDehio & von Bezold, Tafel 446, Fig. 3Star and net vaults over the double aisles.
Vaults
Choir: net publishedDehio & von Bezold, Tafel 446, Fig. 3
East end
apse, no ambulatory publishedDehio & von Bezold, Tafel 446, Fig. 3
Towers in plan
one west tower, 2 more towers publishedDehio & von Bezold, Tafel 446, Fig. 3The west tower on the axis; two towers flank the choir.
Flying buttresses
one tier publishedDehio & von Bezold, Tafel 467, Fig. 1One flyer spanning both aisles; the plate of 1901 shows the flyers added in the 19th century.
Five-aisle system
one flyer over both aisles (pp. 289, 389) publishedLehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289The book names Ulm for one flyer spanning both aisles (system 1); the row of piers inserted later between the aisles is especially slender.

Dimensions

DimensionsValueConventionSource
Nave width16.99 m ± 0.1 maxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3122, 5468.5) to (3122, 5969.5) px; scale 40 m = 1179.5 px

Nave piers, axis to axis. No open source gives the nave width; de gives 15 m clear for the choir.

Aisle widths8.66 m ± 0.1 mInner aisle, pier axis to pier axisaxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3122, 5213) to (3122, 5468.5) px; scale 40 m = 1179.5 px
7.14 m ± 0.1 mOuter aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3122, 5002.5) to (3122, 5213) px; scale 40 m = 1179.5 px
Bay length7.29 m ± 0.05 maxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (2694, 5465) to (3553.5, 5465) px; scale 40 m = 1179.5 px · over 4 bays

Nave pier axes over 4 bays.

Nave vault height41.6 mto the crownprovisionalde Wikipedia, revision 271750653

de (and en), after the Landesamt für Denkmalpflege Baden-Württemberg.

Aisle vault heights20.55 mto the crownprovisionalde Wikipedia, revision 271750653

de.

Piers2.98 m ± 0.1 mNave pier, transverseoverallmeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3122, 5424.5) to (3122, 5512.5) px; scale 40 m = 1179.5 px
Buttress depths4.85 m ± 0.1 mNave buttress, outer face to inner face of the outer aisle walloverallmeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3122, 4859.5) to (3122, 5002.5) px; scale 40 m = 1179.5 px
Wall thicknesses1.46 m ± 0.1 mOuter aisle wall between the buttressesoverallmeasuredDehio & von Bezold, Tafel 446, Fig. 3measured from (3015, 4959.5) to (3015, 5002.5) px; scale 40 m = 1179.5 px

The design in plan

Plan of the design made from Ulm Minster: lozenge net nave vaults, apse, no ambulatory.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of Ulm Minster: nave 16.99 m between pier axes, buttress depth 4.85 m; dashed outline of Amiens Cathedral for comparison.16.99 m4.85 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave a lozenge net vault), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress4.85 m measured4.53 m5.57 m
Building ÷ this depth–1.070.87
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern kept
Geometric factor, cracked1.71 against 2: stands, small margin1.63 against 2: stands, small margin2 against 2: safe
Pier (1890 plan rule)2.98 m2.31 m–
Wall between the buttresses (1890 plan rule)1.46 m1.56 m–

Forces at the springing of the nave vault, 32.21 m above the floor.

Why they differ

  • The measured depth lies within 10 % of the depth the 1890 statics asks for: the book’s kern rule describes this buttress well.
  • Brick: the design weighs the walls as brick, lighter than the stone of the tables, so the rules ask for more depth.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 14.01 m, springing at 32.26 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 14.01 m + 0.05 · 32.26 m) · 0.855 = 4.04 m4.04 m19.16 m4.74
HoffstadtD = 14.01 m / 10 + √2 · 14.01 m / 10 = 3.38 m3.38 m19.16 m5.66
Viollet-le-DucD = 9.73 m · (1 − cos(2 · 73.7 ° / 3)) = 3.37 m3.37 m19.16 m5.69
HaseD = 3.37 m + 0.15 m · 32.26 m / 4.5 m = 4.44 m4.44 m19.16 m4.31
Earlier editionsD = (9.73 m + 0.3 m) / cos(37.1 °) − 9.73 m = 2.85 m2.85 m19.16 m6.73

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

Outer aisle vault: span 5.65 m, springing at 16.78 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = 0.222 · 5.65 m + 0.05 · 16.78 m = 2.09 m2.09 m4.85 m2.32
HoffstadtD = 5.65 m / 10 + √2 · 5.65 m / 10 = 1.36 m1.36 m4.85 m3.56
Viollet-le-DucD = 3.92 m · (1 − cos(2 · 73.7 ° / 3)) = 1.36 m1.36 m4.85 m3.57
HaseD = 1.36 m + 0.15 m · 16.78 m / 4.5 m = 1.92 m1.92 m4.85 m2.53
Earlier editionsD = (3.92 m + 0.3 m) / cos(37.5 °) − 3.92 m = 1.4 m1.4 m4.85 m3.47

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.56.

QuantityValue
Vault thrust per bay (estimate, Table I)60 kN
Height of the thrust (springing)32.26 m
Buttress depth (measured)4.85 m
Buttress breadth (assumed: half the depth)2.43 m
Thrust it holds: block | cracked685 | 228 kN
Minimum depth: block | cracked2.16 | 3.11 m
GSF on depth: block | cracked2.25 | 1.56
Fracture height32.26 m
1890: base joint, eccentricity ÷ kern0.26

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)

  • Ungewitter, Georg Gottlob. 1890. Lehrbuch der gotischen Konstruktionen. 3rd ed., revised by Karl Mohrmann. Vol. 1. Leipzig: Weigel.

    • Lehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289