Skip to content
Ungewitter

← All reference buildings

Strasbourg Cathedral

Strasbourg · Cathédrale Notre-Dame de Strasbourg · Straßburger Münster · Wikidata Q745460

6 measured · 3 published · 7 provisional

The Rayonnant nave of about 1245–1275 stands on the foundations of the Romanesque church, which fixed its unusually wide aisles; the plate agrees with the 10.41 m that Villes gives for them.

Facts

Main building campaign
1245–1275 provisionalde Wikipedia, revision 269326171High Gothic nave begun c. 1245, finished 1275.
Plan type
Basilica, 3 vessels, with transept provisionalde Wikipedia, revision 269326171Romanesque-Gothic basilica of Vosges sandstone.
Material
stone provisionalen Wikipedia, revision 1385260087en: reddish-brown sandstone of the Vosges.
Towers
North spire 142 m (fr: 142.11 m); platform 66 m; crossing tower 58 m; no south spire. provisionalde Wikipedia, revision 269326171
Vaults
Nave: quadripartite provisionalDehio & von Bezold, Tafel 446, Fig. 1The plan draws the aisle vaults quadripartite and leaves the nave’s undrawn; the nave takes the same type.
East end
apse, no ambulatory publishedDehio & von Bezold, Tafel 446, Fig. 1The Romanesque semicircular apse inside a flat-ended block.
Towers in plan
two west towers, a crossing tower publishedDehio & von Bezold, Tafel 446, Fig. 1Two west tower bases, but only the north spire; a crossing tower.
Flying buttresses
one tier publishedDehio & von Bezold, Tafel 461, Fig. 2

Dimensions

DimensionsValueConventionSource
Nave width16.28 m ± 0.1 mNave piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (2285, 1334.5) to (2285, 1820.5) px; scale 30 m = 895.5 px
Other figures
Aisle widths10.49 m ± 0.1 mAisle, pier axis to inner face of the wall (behind the dado arcade)axis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (2285, 1021.5) to (2285, 1334.5) px; scale 30 m = 895.5 px
Other figures
Bay length8.17 m ± 0.05 mNave pier axes over the 3 western baysaxis to axismeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (1798, 1335) to (2529.5, 1335) px; scale 30 m = 895.5 px · over 3 bays
Nave vault height32 mconvention not statedprovisionalde Wikipedia, revision 269326171

Interior height of nave, after dombaumeisterev.de and archINFORM.

Other figures
Aisle vault heights19 mconvention not statedprovisionalde Wikipedia, revision 269326171

Interior height of aisles.

Piers2.81 m ± 0.1 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (2287, 1292.5) to (2287, 1376.5) px; scale 30 m = 895.5 px
Buttress depths3.45 m ± 0.1 mNave buttress, outer face to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (2285, 918.5) to (2285, 1021.5) px; scale 30 m = 895.5 px
Wall thicknesses0.77 m ± 0.1 mAisle wall between the buttressesoverallmeasuredDehio & von Bezold, Tafel 446, Fig. 1measured from (2150, 998.5) to (2150, 1021.5) px; scale 30 m = 895.5 px

The design in plan

Plan of the design made from Strasbourg Cathedral: quadripartite nave vaults, apse, no ambulatory.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of Strasbourg Cathedral: nave 16.28 m between pier axes, buttress depth 3.45 m; dashed outline of Amiens Cathedral for comparison.16.28 m3.45 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress3.45 m measured3.22 m3.49 m
Building ÷ this depth–1.070.99
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked1.63 against 2: stands, small margin1.84 against 2: stands, small margin2 against 2: safe
Pier (1890 plan rule)2.81 m2.21 m–
Wall between the buttresses (1890 plan rule)0.77 m1.5 m–

Forces at the springing of the nave vault, 22.98 m above the floor.

Why they differ

  • The measured depth lies within 10 % of the depth the 1890 statics asks for: the book’s kern rule describes this buttress well.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 13.47 m, springing at 23.02 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 13.47 m + 0.05 · 23.02 m) · 0.874 = 3.62 m3.62 m12.54 m3.46
HoffstadtD = 13.47 m / 10 + √2 · 13.47 m / 10 = 3.25 m3.25 m12.54 m3.85
Viollet-le-DucD = 9.35 m · (1 − cos(2 · 73.7 ° / 3)) = 3.24 m3.24 m12.54 m3.87
HaseD = 3.24 m + 0.15 m · 23.02 m / 4.5 m = 4 m4 m12.54 m3.13
Earlier editionsD = (9.35 m + 0.3 m) / cos(37.1 °) − 9.35 m = 2.75 m2.75 m12.54 m4.55

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

Outer aisle vault: span 9.09 m, springing at 12.94 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 9.09 m + 0.05 · 12.94 m) · 0.939 = 2.5 m2.5 m3.45 m1.38
HoffstadtD = 9.09 m / 10 + √2 · 9.09 m / 10 = 2.19 m2.19 m3.45 m1.57
Viollet-le-DucD = 6.31 m · (1 − cos(2 · 73.7 ° / 3)) = 2.18 m2.18 m3.45 m1.58
HaseD = 2.18 m + 0.15 m · 12.94 m / 4.5 m = 2.61 m2.61 m3.45 m1.32
Earlier editionsD = (6.31 m + 0.3 m) / cos(37.2 °) − 6.31 m = 1.99 m1.99 m3.45 m1.73

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.08.

QuantityValue
Vault thrust per bay (estimate, Table I)65 kN
Height of the thrust (springing)23.02 m
Buttress depth (measured)3.45 m
Buttress breadth (assumed: half the depth)1.73 m
Thrust it holds: block | cracked246 | 82 kN
Minimum depth: block | cracked2.21 | 3.19 m
GSF on depth: block | cracked1.56 | 1.08
Fracture height23.02 m
1890: base joint, eccentricity ÷ kern0.79

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.