Skip to content
Ungewitter

← All reference buildings

St Mary’s in the Meadow (Wiesenkirche), Soest

Soest · St. Maria zur Wiese · Wiesenkirche, Soest · Wikidata Q1337464

6 measured · 2 published · 2 derived · 7 provisional

The purest Westphalian hall church: three vessels of nearly equal height on an almost square plan, slender piers and walls opened into glass between the buttresses, the three choirs ending in polygons. Begun in 1313 to the design of Johannes Schendeler. The articles give 24 m for the height of the church; a module of 6.75 m (Memminger) would give 27 m to the crown.

Facts

Main building campaign
1313–1376 provisionalde Wikipedia, revision 271519792Foundation 1313 (inscription, hard to read); choir finished 1376 under Schendeler's design.
Plan type
Hall church, 3 vessels, no transept provisionalde Wikipedia, revision 271519792Westphalian hall church on near-square plan.
Hall
aisles as high as the nave provisionalde Wikipedia, revision 271519792Three vessels of nearly equal height (de and fr).
Material
stone provisionalfr Wikipedia, revision 237873717fr: sandstone from quarries south of Soest.
Nave bays
3 derivedDehio & von Bezold, Tafel 454, Fig. 8Counted on the plan: two pairs of free piers, then the west tower piers.
Choir ending
7/10: 7 sides of a 10-sided polygon provisionalde Wikipedia, revision 271519792Main apse closed by seven sides of a decagon; side apses without buttresses.
Towers
Twin west towers, 19th-c. completion: 75 m / 74.7 m (de) or 81 m (fr). provisionalde Wikipedia, revision 271519792
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 454, Fig. 8
East end
apse, no ambulatory publishedDehio & von Bezold, Tafel 454, Fig. 8Three apses, the central one 7/10.
Towers in plan
two west towers provisionalde Wikipedia, revision 271519792Two west towers, completed in the 19th century.
Flying buttresses
none derivedDehio & von Bezold, Tafel 454, Fig. 8A hall church: the aisle vaults abut the nave at its own height, so there are no flying buttresses.

Dimensions

DimensionsValueConventionSource
Nave width10.87 m ± 0.15 mNave, pier axis to pier axis (centres of the arcade mouldings)axis to axismeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (4194, 5900) to (4520, 5900) px; scale 10 m = 300 px
Aisle widths7.15 m ± 0.1 mNorth aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (3979.5, 5900) to (4194, 5900) px; scale 10 m = 300 px
Bay length10.77 m ± 0.15 mNave, pier axis to pier axis along the arcade (one bay)axis to axismeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (4193, 5724) to (4193, 6047) px; scale 10 m = 300 px
Nave vault height24 mconvention not statedprovisionalde Wikipedia, revision 271519792

'Height of the church' 24 m in dimension list.

Other figures
Piers1.97 m ± 0.1 mNave pier, lozenge across its corners, transverseoverallmeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (4163.5, 5728) to (4222.5, 5728) px; scale 10 m = 300 px
Buttress depths2.93 m ± 0.1 mNorth buttress, outer face to inner face of the walloverallmeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (3890.5, 5718) to (3978.5, 5718) px; scale 10 m = 300 px
Wall thicknesses1.27 m ± 0.1 mNorth wall between the buttressesoverallmeasuredDehio & von Bezold, Tafel 454, Fig. 8measured from (3939.5, 5800) to (3977.5, 5800) px; scale 10 m = 300 px

The design in plan

Plan of the design made from St Mary’s in the Meadow (Wiesenkirche), Soest: quadripartite nave vaults, apse, no ambulatory.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of St Mary’s in the Meadow (Wiesenkirche), Soest: nave 10.87 m between pier axes, buttress depth 2.93 m; dashed outline of Amiens Cathedral for comparison.10.87 m2.93 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress2.93 m measured3.18 m3.18 m
Building ÷ this depth–0.920.92
Kern rule of 1890edge pressure too high (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked0.99 against 1: fails1.05 against 1: safe1.05 against 1: safe
Pier (1890 plan rule)1.97 m0.65 m–
Wall between the buttresses (1890 plan rule)1.27 m0.99 m–

Forces at the springing of the nave vault, 18.04 m above the floor.

Why they differ

  • The measured depth lies within 10 % of the depth the 1890 statics asks for: the book’s kern rule describes this buttress well.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

A hall church: nave and aisle vaults spring at about the same height and lean on one another, so only the outer aisle vault presses on the buttresses. The rules are applied to it, as in Ungewitter’s own hall-church example.

Outer aisle vault: span 6.17 m, springing at 19.89 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = 0.222 · 6.17 m + 0.05 · 19.89 m = 2.36 m2.36 m2.93 m1.24
HoffstadtD = 6.17 m / 10 + √2 · 6.17 m / 10 = 1.49 m1.49 m2.93 m1.97
Viollet-le-DucD = 4.28 m · (1 − cos(2 · 73.7 ° / 3)) = 1.48 m1.48 m2.93 m1.98
HaseD = 1.48 m + 0.15 m · 19.89 m / 4.5 m = 2.14 m2.14 m2.93 m1.37
Earlier editionsD = (4.28 m + 0.3 m) / cos(37.4 °) − 4.28 m = 1.49 m1.49 m2.93 m1.97

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.47.

QuantityValue
Vault thrust per bay (estimate, Table I)39 kN
Vault load on the buttress (estimate, Table I)124 kN
Height of the thrust (springing)19.89 m
Buttress depth (measured)2.93 m
Buttress breadth (assumed: half the depth)1.47 m
Thrust it holds: block | cracked169 | 96 kN
Minimum depth: block | cracked1.68 | 1.99 m
GSF on depth: block | cracked1.74 | 1.47
Fracture height14.55 m
1890: base joint, eccentricity ÷ kern0.56

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • A hall church: the outer aisle vault is taken (its span and crown), with its vertical load on the wall and buttress.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)