Skip to content
Ungewitter

← All reference buildings

Sens Cathedral

Sens · Cathédrale Saint-Étienne de Sens · Kathedrale von Sens · Wikidata Q489014

5 measured · 5 published · 7 provisional

The first Gothic cathedral: sexpartite vaults on alternating strong piers and paired columns, so the bay given is a single bay and the vaulting unit about 11.2 m. The transept is a late addition (about 1490–1518). Wikipedia’s 15.25 m for the central vessel does not state its convention; on the plate the strong piers stand 14.9 m apart.

Facts

Main building campaign
1140–1168 provisionalde Wikipedia, revision 270457224Choir from 1140/45 built in one go, nearly done 1168; after Nussbaum, p. 50.
Plan type
Basilica, 3 vessels, with transept provisionalfr Wikipedia, revision 240909353Central vessel with two aisles continued as ambulatory round the choir.
Material
stone provisionalfr Wikipedia, revision 240909353fr: local sandstone, and above all Lutetian limestone brought from near Paris.
Nave bays
5 provisionalfr Wikipedia, revision 240909353Nave: one oblong bay plus four square sexpartite bays; aisles seven square bays.
Choir ending
5/10: 5 sides of a 10-sided polygon provisionalDehio & von Bezold, Tafel 366, Fig. 1Read on the plan: a hemicycle of five bays; the polygon is approximate.
Towers
South tower 78 m to campanile top (66 m to terrace); en infobox 78.25 m. provisionalfr Wikipedia, revision 240909353
Vaults
Nave: sexpartite publishedDehio & von Bezold, Tafel 366, Fig. 1Diagonals over double bays on the alternating strong piers and paired columns, a transverse rib through the columns.
Vaults
Aisles: quadripartite publishedDehio & von Bezold, Tafel 366, Fig. 1
East end
an ambulatory with one chapel publishedDehio & von Bezold, Tafel 366, Fig. 1The 12th-century plan: one ambulatory with a single axial chapel.
Towers in plan
two west towers publishedDehio & von Bezold, Tafel 366, Fig. 1Two west towers; the late transept (about 1490–1518) has no crossing tower.
Flying buttresses
one tier publishedDehio & von Bezold, Tafel 379, Fig. 2

Dimensions

DimensionsValueConventionSource
Nave width14.92 m ± 0.2 mStrong nave piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 366, Fig. 1measured from (344, 1200) to (536, 1200) px; scale 30 m = 386 px
Other figures
Aisle widths7.03 m ± 0.2 mWest aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 366, Fig. 1measured from (253.5, 1180) to (344, 1180) px; scale 30 m = 386 px
Bay length5.62 m ± 0.05 mStrong pier axes over 8 single bays (4 sexpartite double bays)axis to axismeasuredDehio & von Bezold, Tafel 366, Fig. 1measured from (344, 765.5) to (344, 1343.5) px; scale 30 m = 386 px · over 8 bays
Nave vault height24.4 mconvention not statedprovisionalfr Wikipedia, revision 240909353

Nave height 24.4 m in dimensions list.

Other figures
Piers2.56 m ± 0.2 mStrong nave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 366, Fig. 1measured from (327.5, 1200) to (360.5, 1200) px; scale 30 m = 386 px
Buttress depths4.12 m ± 0.2 mWest buttress, outer face to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 366, Fig. 1measured from (200.5, 1200) to (253.5, 1200) px; scale 30 m = 386 px

The design in plan

Plan of the design made from Sens Cathedral: sexpartite nave vaults, an ambulatory with one chapel.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side.

One bay in plan, to scale

Plan of one bay of Sens Cathedral: nave 14.92 m between pier axes, buttress depth 4.12 m; dashed outline of Amiens Cathedral for comparison.14.92 m4.12 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave sexpartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress4.12 m measured2.36 m2.75 m
Building ÷ this depth–1.741.5
Kern rule of 1890kern keptkern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked3 against 2: safe1.72 against 2: stands, small margin2 against 2: safe
Pier (1890 plan rule)2.56 m2.03 m–
Wall between the buttresses (1890 plan rule)–1.37 m–

Forces at the springing of the nave vault, 16.12 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of one tier of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 12.36 m, springing at 16.16 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 12.36 m + 0.05 · 16.16 m) · 0.85 = 3.02 m3.02 m9.87 m3.27
HoffstadtD = 12.36 m / 10 + √2 · 12.36 m / 10 = 2.98 m2.98 m9.87 m3.31
Viollet-le-DucD = 8.58 m · (1 − cos(2 · 73.7 ° / 3)) = 2.97 m2.97 m9.87 m3.32
HaseD = 2.97 m + 0.15 m · 16.16 m / 4.5 m = 3.51 m3.51 m9.87 m2.81
Earlier editionsD = (8.58 m + 0.3 m) / cos(37.2 °) − 8.58 m = 2.56 m2.56 m9.87 m3.85

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.51.

QuantityValue
Vault thrust per bay (estimate, Table I)41 kN
Height of the thrust (springing)16.16 m
Buttress depth (measured)4.12 m
Buttress breadth (assumed: half the depth)2.06 m
Thrust it holds: block | cracked420 | 140 kN
Minimum depth: block | cracked1.9 | 2.73 m
GSF on depth: block | cracked2.17 | 1.51
Fracture height16.16 m
1890: base joint, eccentricity ÷ kern0.29

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.