Skip to content
Ungewitter

← All reference buildings

St Vitus Cathedral, Prague

Prague · Katedrála svatého Víta, Václava a Vojtěcha · Veitsdom, Prag · Wikidata Q5949

5 measured · 3 published · 8 provisional

The dimensions on this page describe the choir: the part of the church that is Gothic, or that the plate draws.

Begun in 1344 by Matthias of Arras on the French cathedral plan and continued from 1356 by Peter Parler, whose net vaults over the choir became the model for central European late Gothic. Only the choir was finished in the Middle Ages; the nave was completed in 1929, so the values here are those of the choir. The plate gives the central vessel as 16.2 m between pier axes, wide for the 33 m vault; the buttresses enclose chapels and are not given as plain buttress depths.

Facts

Main building campaign
1344–1420 provisionalde Wikipedia, revision 271356922Begun Nov 1344; choir and main-tower base done before Hussite wars 1420.
Plan type
Basilica, 3 vessels, with transept provisionalen Wikipedia, revision 1384497271Three-aisled basilica with flying buttresses, French-inspired plan.
Material
stone provisionalen Wikipedia, revision 1384497271en: Parler “playing with structural forms in stone”; the stone is not named.
Choir ending
5/10: 5 sides of a 10-sided polygon provisionalen Wikipedia, revision 1384497271en: a decagon apse; the plate reads closer to 5/8.
Towers
Great south tower 96.6 m (cs), 96.5 m (fr), 99 m (de), 102.8 m (en); west towers 82 m. provisionalcs Wikipedia, revision 26345995
Vaults
Nave: net of parallel ribs publishedDehio & von Bezold, Tafel 447, Fig. 3Parler’s net of parallel ribs over the main vessel of the choir.
Vaults
Aisles: quadripartite publishedDehio & von Bezold, Tafel 447, Fig. 3
East end
an ambulatory with 5 radiating chapels publishedDehio & von Bezold, Tafel 447, Fig. 3Five radiating chapels; chapels between the buttresses along the straight bays.
Towers in plan
two west towers, one more tower provisionalcs Wikipedia, revision 26345995The great south tower; the two west towers came with the completion of 1929.
Flying buttresses
one tier provisionalen Wikipedia, revision 1384497271en: a three-aisled basilica with flying buttresses; the number of tiers is not stated.

Dimensions

DimensionsValueConventionSource
Nave width16.18 m ± 0.1 mChoir piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 447, Fig. 3measured from (3931.5, 1783.5) to (4412, 1754) px; scale 20 m = 594.1 px
Aisle widths7.19 m ± 0.1 mChoir aisle, pier axis to inner end of the chapel buttress (south)axis to axismeasuredDehio & von Bezold, Tafel 447, Fig. 3measured from (4412, 1738) to (4625.5, 1738) px; scale 20 m = 594.1 px
Bay length9.16 m ± 0.05 mChoir pier axes over 3 baysaxis to axismeasuredDehio & von Bezold, Tafel 447, Fig. 3measured from (3931, 1240) to (3931, 2056) px; scale 20 m = 594.1 px · over 3 bays
Nave vault height33 mconvention not statedprovisionalcs Wikipedia, revision 26345995

Infobox: vault height 33 m.

Other figures
Piers2.15 m ± 0.1 mChoir pier, transverse, tip to tipoverallmeasuredDehio & von Bezold, Tafel 447, Fig. 3measured from (3899, 1783.5) to (3963, 1783.5) px; scale 20 m = 594.1 px
Wall thicknesses1.68 m ± 0.1 mOuter wall of the chapelsoverallmeasuredDehio & von Bezold, Tafel 447, Fig. 3measured from (4885.5, 1880) to (4935.5, 1880) px; scale 20 m = 594.1 px

The design in plan

Plan of the design made from St Vitus Cathedral, Prague: net of parallel ribs nave vaults, an ambulatory with 5 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side.

One bay in plan, to scale

Plan of one bay of St Vitus Cathedral, Prague: nave 16.18 m between pier axes, buttress depth – m; dashed outline of Amiens Cathedral for comparison.16.18 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave a net vault of parallel ribs), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

No measured buttress depth, so there is nothing to set against the statics here.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

No measured buttress depth yet: the plate shows no plain buttress to measure (only a section, or chapels between the buttresses), so the rules stand without a comparison.

Nave vault: span 14.03 m, springing at 23.65 m

RuleFilled inRule says
Mohrmann, rule 5D = (0.222 · 14.03 m + 0.05 · 23.65 m) · 0.884 = 3.8 m3.8 m
HoffstadtD = 14.03 m / 10 + √2 · 14.03 m / 10 = 3.39 m3.39 m
Viollet-le-DucD = 9.74 m · (1 − cos(2 · 73.7 ° / 3)) = 3.37 m3.37 m
HaseD = 3.37 m + 0.15 m · 23.65 m / 4.5 m = 4.16 m4.16 m
Earlier editionsD = (9.74 m + 0.3 m) / cos(37.1 °) − 9.74 m = 2.85 m2.85 m

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

No buttress depth is recorded for this building, so there is no modern check.

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)

  • Wikipedia contributors. 2026. Articles on Gothic churches in the Spanish, Catalan, Italian, Czech and English Wikipedias. Accessed November 21, 2026.

    Numbers only, each with its article revision. Prose may not be copied (CC BY-SA share-alike).