Skip to content
Ungewitter

← All reference buildings

Milan Cathedral

Milan · Duomo di Milano · Mailänder Dom · Wikidata Q18068

7 measured · 3 published · 8 provisional

Begun in 1386 and argued over by Italian, French and German masters; the expertises of 1392–1401 (Mignot’s “ars sine scientia nihil est”) are the best-documented medieval debate on Gothic proportion and statics. Five vessels stepping down only slightly, so the clerestory is small; the core is brick, faced with Candoglia marble.

Facts

Main building campaign
1386–1965 provisionalen Wikipedia, revision 1384597154Begun 1386; final details completed 1965, nearly six centuries.
Plan type
Basilica, 5 vessels, with transept provisionalit Wikipedia, revision 152961509Aisles step down slightly so small clerestory windows fit; no triforium.
Material
stone provisionalde Wikipedia, revision 270678480de: marble from Candoglia; en: brick with Candoglia marble.
Choir ending
3/8: 3 sides of a 8-sided polygon provisionalDehio & von Bezold, Tafel 537, Fig. 3
Towers
Crossing tiburio 68 m (interior 50 m); Madonnina spire top 108.5 m. provisionalit Wikipedia, revision 152961509
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 537, Fig. 3
East end
an ambulatory with no radiating chapels publishedDehio & von Bezold, Tafel 537, Fig. 3An ambulatory with a three-sided outer wall and no chapels; sacristies on both sides.
Towers in plan
no west tower, a crossing tower provisionalit Wikipedia, revision 152961509No west towers; the crossing tower (tiburio) with the Madonnina spire.
Flying buttresses
one tier publishedDehio & von Bezold, Tafel 548, Fig. 2One tier in two flights, drawn as tracery arches over solid walls.
Five-aisle system
heights stepped down to the outer aisles (p. 289) publishedLehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289The book names Milan for the stepped section “in a much soberer form” (system 3).

Dimensions

DimensionsValueConventionSource
Nave width18.62 m ± 0.1 mNave piers, axis to axis (centroids of the pier sections)axis to axismeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1803, 4886.3) to (1803, 5432.7) px; scale 50 m = 1467.4 px
Aisle widths9.52 m ± 0.1 mInner north aisle, pier axis to pier axisaxis to axismeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1800, 4606.8) to (1800, 4886.3) px; scale 50 m = 1467.4 px
9.38 m ± 0.1 mOuter north aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1800, 4331.5) to (1800, 4606.8) px; scale 50 m = 1467.4 px
Bay length9.76 m ± 0.05 mNave pier axes over 4 bays (from the second pier pair from the west)axis to axismeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1229.8, 4885.6) to (2375, 4870.3) px; scale 50 m = 1467.4 px · over 4 bays
Nave vault height45 mconvention not statedprovisionalit Wikipedia, revision 152961509

Vault height 45 m in dimension table.

Other figures
Piers2.83 m ± 0.1 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1803, 4845.5) to (1803, 4928.5) px; scale 50 m = 1467.4 px
3.4 mconvention not statedprovisionalit Wikipedia, revision 152961509

it: diameter of the interior piers (52 piers, 24 m tall).

Buttress depths4.5 m ± 0.1 mNave buttress (north), outer face (above the plinth) to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1785, 4199.5) to (1785, 4331.5) px; scale 50 m = 1467.4 px
Wall thicknesses1.67 m ± 0.1 mNorth aisle wall between the buttresses (window zone)overallmeasuredDehio & von Bezold, Tafel 537, Fig. 3measured from (1660, 4282.5) to (1660, 4331.5) px; scale 50 m = 1467.4 px

The design in plan

Plan of the design made from Milan Cathedral: quadripartite nave vaults, an ambulatory with no radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side. The church has two aisles on each side; the drawing shows the inner one.

One bay in plan, to scale

Plan of one bay of Milan Cathedral: nave 18.62 m between pier axes, buttress depth 4.5 m; dashed outline of Amiens Cathedral for comparison.18.62 m4.5 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Outside the Studio’s range, so changed:

  • Choir ending: measured 8, the design takes 4

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress4.5 m measured4.06 m4.06 m
Building ÷ this depth–1.111.11
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked2.56 against 2: safe2.31 against 2: safe2.31 against 2: safe
Pier (1890 plan rule)2.83 m2.53 m–
Wall between the buttresses (1890 plan rule)1.67 m1.75 m–

Forces at the springing of the nave vault, 34.42 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of one tier of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 15.79 m, springing at 34.47 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 15.79 m + 0.05 · 34.47 m) · 0.876 = 4.59 m4.59 m21.99 m4.79
HoffstadtD = 15.79 m / 10 + √2 · 15.79 m / 10 = 3.81 m3.81 m21.99 m5.77
Viollet-le-DucD = 10.97 m · (1 − cos(2 · 73.7 ° / 3)) = 3.79 m3.79 m21.99 m5.79
HaseD = 3.79 m + 0.15 m · 34.47 m / 4.5 m = 4.94 m4.94 m21.99 m4.45
Earlier editionsD = (10.97 m + 0.3 m) / cos(37.1 °) − 10.97 m = 3.16 m3.16 m21.99 m6.96

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.26.

QuantityValue
Vault thrust per bay (estimate, Table I)91 kN
Height of the thrust (springing)34.47 m
Buttress depth (measured)4.5 m
Buttress breadth (assumed: half the depth)2.25 m
Thrust it holds: block | cracked547 | 182 kN
Minimum depth: block | cracked2.47 | 3.57 m
GSF on depth: block | cracked1.82 | 1.26
Fracture height34.47 m
1890: base joint, eccentricity ÷ kern0.5

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Wikipedia contributors. 2026. Articles on Gothic churches in the Spanish, Catalan, Italian, Czech and English Wikipedias. Accessed November 21, 2026.

    Numbers only, each with its article revision. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)

  • Ungewitter, Georg Gottlob. 1890. Lehrbuch der gotischen Konstruktionen. 3rd ed., revised by Karl Mohrmann. Vol. 1. Leipzig: Weigel.

    • Lehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289