Lincoln Cathedral
Lincoln · Kathedrale von Lincoln · Wikidata Q390169
6 measured · 4 published · 1 derived · 7 provisional
Early English Gothic with two transepts and a flat east end; the nave vault of 1233 has tiercerons and a ridge rib. Its rib geometry can be checked against the CC BY laser scans of the Tracing the Past project.
Facts
- Main building campaign
- 1192–1235 provisionalde Wikipedia, revision 263130424Post-earthquake rebuild under Geoffrey de Noiers, begun 1192, finished 1235.
- Plan type
- Basilica, 3 vessels, with transept provisionalde Wikipedia, revision 263130424Three-aisled gallery basilica with wide bays.
- Material
- stone provisionalen Wikipedia, revision 1384924793en: mostly Lincolnshire limestone; Purbeck marble shafts.
- Nave bays
- 7 provisionalde Wikipedia, revision 263130424Seven nave bays vaulted in 1233 with tierceron and ridge ribs.
- Choir ending
- flat east end derivedDehio & von Bezold, Tafel 425, Fig. 2Angel Choir with a flat east end, read on the plan.
- Towers
- Crossing tower 83 m (271 ft), raised 1307-1311; lost spire reputedly 160 m (525 ft). provisionalen Wikipedia, revision 1384924793
- Vaults
- Nave: tierceron publishedDehio & von Bezold, Tafel 425, Fig. 2Tierceron vaults with a ridge rib in the nave and both choirs.
- Vaults
- Aisles: quadripartite publishedDehio & von Bezold, Tafel 425, Fig. 2
- East end
- flat east end, no ambulatory publishedDehio & von Bezold, Tafel 425, Fig. 2The Angel Choir ends flat; round-ended chapels stand on the east transept.
- Towers in plan
- two west towers, a crossing tower provisionalen Wikipedia, revision 1384924793The Norman west block carries the two west towers; the crossing tower was raised 1307–1311.
- Flying buttresses
- one tier publishedDehio & von Bezold, Tafel 429, Fig. 2Section of the choir: one flyer, with a second arch hidden under the aisle roof.
Dimensions
| Dimensions | Value | Convention | Source |
|---|---|---|---|
| Nave width | 12.5 m ± 0.2 mNave piers, axis to axis | axis to axismeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (597, 2296) to (597, 2457) px; scale 20 m = 257.5 px |
| Aisle widths | 5.16 m ± 0.2 mNorth aisle, pier axis to inner face of the wall | axis to axismeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (597, 2229.5) to (597, 2296) px; scale 20 m = 257.5 px |
| Bay length | 8 m ± 0.1 mNave pier axes over 3 bays | axis to axismeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (597, 2293) to (906, 2293) px; scale 20 m = 257.5 px · over 3 bays |
| Nave vault height | 25 m | convention not statedprovisional | en Wikipedia, revision 1370202781 en: List of highest church naves, after an anonymous guide booklet; no article on the cathedral gives the height. |
| Piers | 1.94 m ± 0.2 mNave pier across the shafts, transverse | overallmeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (596, 2283.5) to (596, 2308.5) px; scale 20 m = 257.5 px |
| Buttress depths | 2.64 m ± 0.2 mNave buttress, outer face to inner face of the aisle wall | overallmeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (596, 2195.5) to (596, 2229.5) px; scale 20 m = 257.5 px |
| Wall thicknesses | 1.16 m ± 0.2 mAisle wall between the buttresses | overallmeasured | Dehio & von Bezold, Tafel 425, Fig. 2measured from (640, 2214.5) to (640, 2229.5) px; scale 20 m = 257.5 px |
The design in plan
One bay in plan, to scale
As a design
The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave with tiercerons), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.
Measured against the 1890 statics and the modern check
The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.
| Quantity | Building, measured | Ungewitter 1890, statics | Modern check (Heyman) |
|---|---|---|---|
| Depth of wall and buttress | 2.64 m measured | 2.38 m | 2.49 m |
| Building ÷ this depth | – | 1.11 | 1.06 |
| Kern rule of 1890 | kern left in the storm only (with wind from the left) | kern left in the storm only (with wind from the left) | kern left in the storm only (with wind from the left) |
| Geometric factor, cracked | 1.06 against 1: safe | 0.96 against 1: fails | 1 against 1: safe |
| Pier (1890 plan rule) | 1.94 m | 1.7 m | – |
| Wall between the buttresses (1890 plan rule) | 1.16 m | 1.17 m | – |
Forces at the springing of the nave vault, 17.92 m above the floor.
Why they differ
- The building is deeper than the statics asks. Its buttresses stand at the foot of one tier of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
- The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.
Ungewitter’s rules against this building
The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.
In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.
Nave vault: span 10.56 m, springing at 17.96 m
| Rule | Filled in | Rule says | Building has | Building ÷ rule |
|---|---|---|---|---|
| Mohrmann, rule 5 | D = (0.222 · 10.56 m + 0.05 · 17.96 m) · 0.907 = 2.94 m | 2.94 m | 6.83 m | 2.32 |
| Hoffstadt | D = 10.56 m / 10 + √2 · 10.56 m / 10 = 2.55 m | 2.55 m | 6.83 m | 2.68 |
| Viollet-le-Duc | D = 7.33 m · (1 − cos(2 · 73.7 ° / 3)) = 2.54 m | 2.54 m | 6.83 m | 2.69 |
| Hase | D = 2.54 m + 0.15 m · 17.96 m / 4.5 m = 3.14 m | 3.14 m | 6.83 m | 2.18 |
| Earlier editions | D = (7.33 m + 0.3 m) / cos(37.2 °) − 7.33 m = 2.25 m | 2.25 m | 6.83 m | 3.04 |
Building has: whole abutment system: aisles + buttress, from the nave pier’s face
No aisle vault height is known, so the aisle vault is not checked.
Assumptions
- Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
- Heavy stone; no help from the walls between the buttresses.
The modern check: Heyman’s geometric factor
The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?
Cracked, the buttress would not hold the estimated thrust (geometric factor 0.9).
| Quantity | Value |
|---|---|
| Vault thrust per bay (estimate, Table I) | 50 kN |
| Height of the thrust (springing) | 17.96 m |
| Buttress depth (measured) | 2.64 m |
| Buttress breadth (assumed: half the depth) | 1.32 m |
| Thrust it holds: block | cracked | 110 | 37 kN |
| Minimum depth: block | cracked | 2.02 | 2.92 m |
| GSF on depth: block | cracked | 1.3 | 0.9 |
| Fracture height | 17.96 m |
| 1890: base joint, eccentricity ÷ kern | 1.35 |
Assumptions
- Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
- In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
- Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).
Plates
Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.
Sources
Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.
Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.
Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).
Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.
Universitätsbibliothek Heidelberg (requested in the IIIF manifest)