Skip to content
Ungewitter

← All reference buildings

Girona Cathedral

Girona · Catedral de Girona · Kathedrale von Girona · Wikidata Q2261322

3 measured · 3 published · 8 provisional

The widest Gothic single nave, vaulted in four bays; chapels between internal buttresses. The direct case for Ungewitter’s single-span abutment rules.

Facts

Main building campaign
1312–1606 provisionalde Wikipedia, revision 266309313New choir from 1312; the single nave decided in 1416/17, its first vaults closed about 1450, finished 1606.
Plan type
Single nave, one vessel, no transept provisionalde Wikipedia, revision 266309313
Choir
basilican choir publishedDehio & von Bezold, Tafel 508, Fig. 1The 14th-century choir has aisles, an ambulatory and a clerestory, before the single nave was built.
Material
stone provisionalde Wikipedia, revision 266309313de: limestone of Girona with golden sandstone (described at the tower).
Nave bays
4 provisionalde Wikipedia, revision 266309313
Choir ending
7/12: 7 sides of a 12-sided polygon provisionalDehio & von Bezold, Tafel 508, Fig. 1
Towers
Bell tower 67 m (de) or 70 m (fr). provisionalde Wikipedia, revision 266309313
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 508, Fig. 1Four quadripartite bays over the single nave.
East end
an ambulatory with 7 radiating chapels publishedDehio & von Bezold, Tafel 508, Fig. 1
Towers in plan
no west tower, one more tower provisionalde Wikipedia, revision 266309313No west towers; a bell tower beside the church.
Flying buttresses
none publishedDehio & von Bezold, Tafel 516, Fig. 1The nave is abutted by solid wall buttresses with chapels between them.

Dimensions

DimensionsValueConventionSource
Nave width21.55 m ± 0.1 mclearmeasuredDehio & von Bezold, Tafel 508, Fig. 1measured from (498.5, 1730) to (1143.5, 1730) px; scale 40 m = 1197 px

Nave, clear between the wall faces above the chapel openings.

Other figures
  • 22.98 m · convention not stated provisionalfr Wikipedia, revision 240739547fr and en: the widest Gothic nave. The article does not say whether the width is axis to axis or clear.
  • 23 m · convention not stated provisionalde Wikipedia, revision 266309313de: 23 m span. The article does not say whether the width is axis to axis or clear.
Bay length11.71 m ± 0.1 maxis to axismeasuredDehio & von Bezold, Tafel 508, Fig. 1measured from (1142, 1849) to (1142, 2199.5) px; scale 40 m = 1197 px

Nave responds, axis to axis.

Nave vault height35 mto the crownprovisionalde Wikipedia, revision 266309313

de, fr and en agree; the en infobox gives 45 m, unqualified.

Buttress depths6.12 m ± 0.1 mNave buttress (north), inner face of the nave wall to the outer face of the chapel walloverallmeasuredDehio & von Bezold, Tafel 508, Fig. 1measured from (315.5, 1830) to (498.5, 1830) px; scale 40 m = 1197 px

The design in plan

Plan of the design made from Girona Cathedral: quadripartite nave vaults, an ambulatory with 7 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it.

One bay in plan, to scale

Plan of one bay of Girona Cathedral: nave 21.55 m between pier axes, buttress depth 6.12 m; dashed outline of Amiens Cathedral for comparison.21.55 m6.12 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Outside the Studio’s range, so changed:

  • Chevet (needs aisles in the Studio): measured 1, the design takes 0

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress6.12 m measured4.02 m4.02 m
Building ÷ this depth–1.521.52
Kern rule of 1890kern keptkern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked2.24 against 1: safe1.47 against 1: safe1.47 against 1: safe
Wall between the buttresses (1890 plan rule)–2.39 m–

Forces at the springing of the nave vault, 20.56 m above the floor.

Why they differ

  • A single nave: the buttresses take the vault directly. The building keeps a margin over the kern rule.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

A single nave: the buttresses take the vault directly, the case the rules were made for.

Nave vault: span 21.55 m, springing at 20.63 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 21.55 m + 0.05 · 20.63 m) · 0.86 = 5 m5 m6.12 m1.22
HoffstadtD = 21.55 m / 10 + √2 · 21.55 m / 10 = 5.2 m5.2 m6.12 m1.18
Viollet-le-DucD = 14.97 m · (1 − cos(2 · 73.7 ° / 3)) = 5.18 m5.18 m6.12 m1.18
HaseD = 5.18 m + 0.15 m · 20.63 m / 4.5 m = 5.87 m5.87 m6.12 m1.04
Earlier editionsD = (14.97 m + 0.3 m) / cos(37 °) − 14.97 m = 4.16 m4.16 m6.12 m1.47

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

Even cracked, the buttress is 2.16 times as deep as it needs to be to hold the estimated thrust.

QuantityValue
Vault thrust per bay (estimate, Table I)148 kN
Vault load on the buttress (estimate, Table I)470 kN
Height of the thrust (springing)20.63 m
Buttress depth (measured)6.12 m
Buttress breadth (assumed: half the depth)3.06 m
Thrust it holds: block | cracked1,515 | 828 kN
Minimum depth: block | cracked2.48 | 2.84 m
GSF on depth: block | cracked2.46 | 2.16
Fracture height15.45 m
1890: base joint, eccentricity ÷ kern0.16

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.