Skip to content
Ungewitter

← All reference buildings

Chartres Cathedral

Chartres · Cathédrale Notre-Dame de Chartres · Kathedrale von Chartres · Wikidata Q180274

5 measured · 4 published · 7 provisional

The High Gothic prototype: three storeys, quadripartite vaults, flying buttresses from the start. The widest French nave.

Facts

Main building campaign
1194–1260 provisionalde Wikipedia, revision 269746037fr: main structure 1194–1225/1230; en: mostly 1194–1220.
Plan type
Basilica, 3 vessels, with transept provisionalfr Wikipedia, revision 241370894
Material
stone provisionalfr Wikipedia, revision 241370894fr: limestone from Berchères.
Nave bays
7 provisionalen Wikipedia, revision 1381152165en: a seven-bay nave after a two-bay narthex; fr counts five.
Choir ending
7 sides provisionalfr Wikipedia, revision 241370894fr: hemicycle of seven sides (Timbert 2014, pp. 37–38); the polygon it belongs to is not stated.
Towers
South tower 105 m, north tower 113 m (en) or 115 m (de, fr). provisionalen Wikipedia, revision 1381152165
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 363, Fig. 1
East end
a double ambulatory with 7 radiating chapels publishedDehio & von Bezold, Tafel 363, Fig. 1A double ambulatory with three deep and four shallow chapels.
Towers in plan
two west towers publishedDehio & von Bezold, Tafel 363, Fig. 1Two west towers; the towers begun at the transept fronts and beside the choir stop at the roof.
Flying buttresses
2 tiers, one above the other publishedDehio & von Bezold, Tafel 382, Fig. 2Two tiers, the lower a pair of arches joined by small columns like spokes.

Dimensions

DimensionsValueConventionSource
Nave width16.31 m ± 0.2 maxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 1measured from (471.5, 1696) to (677, 1696) px; scale 50 m = 630 px

Nave piers, axis to axis.

Other figures
  • 16.4 m · convention not stated provisionalfr Wikipedia, revision 241370894Given in de, fr and en. The article does not say whether the width is axis to axis or clear.
Aisle widths7.86 m ± 0.2 mAisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 1measured from (372.5, 1696) to (471.5, 1696) px; scale 50 m = 630 px
Bay length6.76 m ± 0.05 maxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 1measured from (471.5, 1521) to (471.5, 1861.5) px; scale 50 m = 630 px · over 4 bays

Nave pier axes over 4 bays.

Nave vault height37.5 mto the crownprovisionalfr Wikipedia, revision 241370894

fr (source: cathedrale.chartres.free.fr).

Other figures
Piers2.54 m ± 0.2 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 363, Fig. 1measured from (455.5, 1696) to (487.5, 1696) px; scale 50 m = 630 px
Buttress depths5.48 m ± 0.2 mNave buttress, outer face to inner face of the aisle walloverallmeasuredDehio & von Bezold, Tafel 363, Fig. 1measured from (303.5, 1696) to (372.5, 1696) px; scale 50 m = 630 px

The design in plan

Plan of the design made from Chartres Cathedral: quadripartite nave vaults, a double ambulatory with 7 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side.

One bay in plan, to scale

Plan of one bay of Chartres Cathedral: nave 16.31 m between pier axes, buttress depth 5.48 m; dashed outline of Amiens Cathedral for comparison.16.31 m5.48 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress5.48 m measured2.88 m3.06 m
Building ÷ this depth–1.91.79
Kern rule of 1890kern keptkern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked3.58 against 2: safe1.88 against 2: stands, small margin2 against 2: safe
Pier (1890 plan rule)2.54 m2.21 m–
Wall between the buttresses (1890 plan rule)–1.53 m–

Forces at the springing of the nave vault, 28.27 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of 2 tiers of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 13.77 m, springing at 28.32 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 13.77 m + 0.05 · 28.32 m) · 0.85 = 3.8 m3.8 m12.07 m3.17
HoffstadtD = 13.77 m / 10 + √2 · 13.77 m / 10 = 3.32 m3.32 m12.07 m3.63
Viollet-le-DucD = 9.56 m · (1 − cos(2 · 73.7 ° / 3)) = 3.31 m3.31 m12.07 m3.65
HaseD = 3.31 m + 0.15 m · 28.32 m / 4.5 m = 4.25 m4.25 m12.07 m2.84
Earlier editionsD = (9.56 m + 0.3 m) / cos(37.1 °) − 9.56 m = 2.81 m2.81 m12.07 m4.3

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.82.

QuantityValue
Vault thrust per bay (estimate, Table I)55 kN
Height of the thrust (springing)28.32 m
Buttress depth (measured)5.48 m
Buttress breadth (assumed: half the depth)2.74 m
Thrust it holds: block | cracked987 | 329 kN
Minimum depth: block | cracked2.09 | 3.01 m
GSF on depth: block | cracked2.62 | 1.82
Fracture height28.32 m
1890: base joint, eccentricity ÷ kern0.17

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.