Skip to content
Ungewitter

← All reference buildings

Burgos Cathedral

Burgos · Catedral de Santa María de Burgos · Kathedrale von Burgos · Wikidata Q744420

6 measured · 1 published · 10 provisional

The first Gothic cathedral of Castile, begun in 1221 on the pattern of Bourges and Coutances, with a low, narrow central vessel; the openwork spires of the west front and the crossing lantern are late Gothic additions by the Colonia family of Cologne.

Facts

Main building campaign
1221–1260 provisionalde Wikipedia, revision 267116028Begun 20 July 1221; high altar consecrated 1260, then ~200-year pause.
Plan type
Basilica, 3 vessels, with transept provisionales Wikipedia, revision 175996520Latin cross, three vessels, centre wider and taller, triforium.
Material
stone provisionales Wikipedia, revision 175996520es: limestone from Hontoria de la Cantera.
Nave bays
9 provisionales Wikipedia, revision 175996520Nine bays on main axis, three of them the deep sanctuary, plus crossing and apse.
Choir ending
5 sides provisionales Wikipedia, revision 175996520es: pentagonal head with ambulatory; the polygon is not stated.
Towers
West towers 88 m; crossing cimborrio 54 m (de, fr) or 59 m ext./43 m int. (es). provisionalde Wikipedia, revision 267116028
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 511, Fig. 1Star vaults over the crossing and in the later chapels.
East end
an ambulatory with 5 radiating chapels provisionalDehio & von Bezold, Tafel 511, Fig. 1About five irregular chapels, among them the octagonal Constable’s chapel.
Towers in plan
two west towers, a crossing tower provisionalde Wikipedia, revision 267116028Two west towers with open-work spires; the crossing tower (cimborrio).
Flying buttresses
2 tiers, one above the other provisionales Wikipedia, revision 175996520es: the nave sheds its thrust onto the aisles through double flyers, after the French cathedrals.

Dimensions

DimensionsValueConventionSource
Nave width11.73 m ± 0.1 mNave, pier axis to pier axis (centres of the arcade lines)axis to axismeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3700, 1142) to (3700, 1483.5) px; scale 40 m = 1164.5 px
Other figures
Aisle widths7.25 m ± 0.1 mSouth aisle, pier axis to inner face of the wall (chapel openings)axis to axismeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3700, 1483.5) to (3700, 1694.5) px; scale 40 m = 1164.5 px
Bay length6.98 m ± 0.05 mNave pier axes over 3 bays (south row)axis to axismeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3186, 1470) to (3795.5, 1470) px; scale 40 m = 1164.5 px · over 3 bays
Nave vault height25 mconvention not statedprovisionales Wikipedia, revision 175996520

Central vessel 25 m high.

Other figures
Piers1.99 m ± 0.1 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3597, 1121.5) to (3597, 1179.5) px; scale 40 m = 1164.5 px
Buttress depths2.92 m ± 0.1 mSouth wall pier between the side chapels, inner face of the aisle wall to the outer face of the chapel walloverallmeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3790, 1694.5) to (3790, 1779.5) px; scale 40 m = 1164.5 px
Wall thicknesses1.61 m ± 0.1 mSouth aisle wall beside a respond (chapel openings between)overallmeasuredDehio & von Bezold, Tafel 511, Fig. 1measured from (3570, 1695.5) to (3570, 1742.5) px; scale 40 m = 1164.5 px

The design in plan

Plan of the design made from Burgos Cathedral: quadripartite nave vaults, an ambulatory with 5 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side.

One bay in plan, to scale

Plan of one bay of Burgos Cathedral: nave 11.73 m between pier axes, buttress depth 2.92 m; dashed outline of Amiens Cathedral for comparison.11.73 m2.92 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress2.92 m measured2.35 m2.36 m
Building ÷ this depth–1.241.24
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked2.7 against 2: safe1 against 1: fails1 against 1: safe
Pier (1890 plan rule)1.99 m1.59 m–
Wall between the buttresses (1890 plan rule)1.61 m1.08 m–

Forces at the springing of the nave vault, 18.47 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of 2 tiers of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 9.74 m, springing at 18.51 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 9.74 m + 0.05 · 18.51 m) · 0.898 = 2.78 m2.78 m9.18 m3.31
HoffstadtD = 9.74 m / 10 + √2 · 9.74 m / 10 = 2.35 m2.35 m9.18 m3.9
Viollet-le-DucD = 6.76 m · (1 − cos(2 · 73.7 ° / 3)) = 2.34 m2.34 m9.18 m3.92
HaseD = 2.34 m + 0.15 m · 18.51 m / 4.5 m = 2.96 m2.96 m9.18 m3.1
Earlier editionsD = (6.76 m + 0.3 m) / cos(37.2 °) − 6.76 m = 2.11 m2.11 m9.18 m4.35

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.08.

QuantityValue
Vault thrust per bay (estimate, Table I)40 kN
Height of the thrust (springing)18.51 m
Buttress depth (measured)2.92 m
Buttress breadth (assumed: half the depth)1.46 m
Thrust it holds: block | cracked149 | 50 kN
Minimum depth: block | cracked1.88 | 2.71 m
GSF on depth: block | cracked1.55 | 1.08
Fracture height18.51 m
1890: base joint, eccentricity ÷ kern0.8

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.

  • Wikipedia contributors. 2026. Dimension lists in German and French Wikipedia articles on Gothic cathedrals. Accessed November 21, 2026.

    Numbers only, each with its traced book citation. Prose may not be copied (CC BY-SA share-alike).

  • Wikipedia contributors. 2026. Articles on Gothic churches in the Spanish, Catalan, Italian, Czech and English Wikipedias. Accessed November 21, 2026.

    Numbers only, each with its article revision. Prose may not be copied (CC BY-SA share-alike).

  • Dehio, Georg, and Gustav von Bezold. 1887–1901. Die kirchliche Baukunst des Abendlandes: Atlas. 5 vols. Stuttgart: Cotta.

    Universitätsbibliothek Heidelberg (requested in the IIIF manifest)