Skip to content
Ungewitter

← All reference buildings

Bourges Cathedral

Bourges · Cathédrale Saint-Étienne de Bourges · Kathedrale von Bourges · Wikidata Q207985

7 measured · 4 published · 9 provisional

Five vessels stepped in height with no transept: the pyramidal section studied by Mark and Wolfe (1974).

Facts

Main building campaign
1195–1230 provisionalfr Wikipedia, revision 240757619Main structure (fr infobox).
Plan type
Basilica, 5 vessels, no transept provisionalde Wikipedia, revision 262249846
Material
stone provisionalfr Wikipedia, revision 240757619fr: Jurassic limestone of Bourges.
Choir ending
5/10: 5 sides of a 10-sided polygon provisionalDehio & von Bezold, Tafel 362, Fig. 3Read on the plan: a hemicycle of five bays; the polygon is approximate.
Towers
North tower 65 m, south tower 53 m (fr). provisionalfr Wikipedia, revision 240757619
Vaults
Nave: sexpartite publishedDehio & von Bezold, Tafel 362, Fig. 3
Vaults
Aisles: quadripartite publishedDehio & von Bezold, Tafel 362, Fig. 3
East end
a double ambulatory with 5 radiating chapels publishedDehio & von Bezold, Tafel 362, Fig. 3A double ambulatory with five small chapels.
Towers in plan
two west towers publishedDehio & von Bezold, Tafel 362, Fig. 3Two west towers of unequal size; no transept.
Flying buttresses
2 tiers, one above the other provisionalDehio & von Bezold, Tafel 376, Fig. 1Flyers in two flights; the section seems to draw two stacked arches over the outer aisle and three over the inner one.
Five-aisle system
heights stepped down to the outer aisles (p. 289) publishedLehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289The book’s example of the stepped section (system 3): the inner aisles rise above the outer with their own triforium and clerestory.

Dimensions

DimensionsValueConventionSource
Nave width15.13 m ± 0.2 maxis to axismeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (790, 2339) to (790, 2530) px; scale 40 m = 505.1 px

Nave piers, axis to axis.

Other figures
  • 14.96 m · convention not stated provisionalfr Wikipedia, revision 240757619fr: central vessel in the choir. The article does not say whether the width is axis to axis or clear.
Aisle widths6.3 m ± 0.2 mInner aisle, pier axis to pier axisaxis to axismeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (790, 2259.5) to (790, 2339) px; scale 40 m = 505.1 px
7.13 m ± 0.2 mOuter aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (790, 2169.5) to (790, 2259.5) px; scale 40 m = 505.1 px
Bay length7.01 m ± 0.05 maxis to axismeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (612.5, 2338) to (1055, 2338) px; scale 40 m = 505.1 px · over 5 bays

Nave pier axes over 5 bays (half a sexpartite vault each).

Nave vault height37.15 mto the crownprovisionalfr Wikipedia, revision 240757619

fr dimension list.

Other figures
Aisle vault heights21.3 mto the crownprovisionalfr Wikipedia, revision 240757619

Inner aisle (fr).

Other figures
9.5 mto the crownprovisionalfr Wikipedia, revision 240757619

Outer aisle (fr list); 9 m in the fr text and de, 8.6 m in en.

Piers1.82 m ± 0.2 mNave pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (790, 2327.5) to (790, 2350.5) px; scale 40 m = 505.1 px
Other figures
  • 1.61 m · convention not stated provisionalfr Wikipedia, revision 240757619fr: strong piers 1.61 m, weak 1.40 m in diameter (after A. Boinet 1952); probably the cylinder without the shafts.
Buttress depths4.28 m ± 0.2 mNave buttress, outer face to inner face of the outer aisle walloverallmeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (790, 2115.5) to (790, 2169.5) px; scale 40 m = 505.1 px
Wall thicknesses1.27 m ± 0.2 mOuter aisle wall between the buttressesoverallmeasuredDehio & von Bezold, Tafel 362, Fig. 3measured from (750, 2153.5) to (750, 2169.5) px; scale 40 m = 505.1 px

The design in plan

Plan of the design made from Bourges Cathedral: sexpartite nave vaults, a double ambulatory with 5 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side. The church has two aisles on each side; the drawing shows the inner one.

One bay in plan, to scale

Plan of one bay of Bourges Cathedral: nave 15.13 m between pier axes, buttress depth 4.28 m; dashed outline of Amiens Cathedral for comparison.15.13 m4.28 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave sexpartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress4.28 m measured3.29 m3.29 m
Building ÷ this depth–1.31.3
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked1.42 against 1: safe2.22 against 2: safe2.22 against 2: safe
Pier (1890 plan rule)1.82 m2.05 m–
Wall between the buttresses (1890 plan rule)1.27 m1.48 m–

Forces at the springing of the nave vault, 28.23 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of 2 tiers of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 13.31 m, springing at 28.28 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 13.31 m + 0.05 · 28.28 m) · 0.856 = 3.74 m3.74 m16.8 m4.49
HoffstadtD = 13.31 m / 10 + √2 · 13.31 m / 10 = 3.21 m3.21 m16.8 m5.23
Viollet-le-DucD = 9.24 m · (1 − cos(2 · 73.7 ° / 3)) = 3.2 m3.2 m16.8 m5.25
HaseD = 3.2 m + 0.15 m · 28.28 m / 4.5 m = 4.14 m4.14 m16.8 m4.06
Earlier editionsD = (9.24 m + 0.3 m) / cos(37.1 °) − 9.24 m = 2.73 m2.73 m16.8 m6.16

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

Outer aisle vault: span 6.22 m, springing at 5.35 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = 0.222 · 6.22 m + 0.05 · 5.35 m = 1.65 m1.65 m4.28 m2.59
HoffstadtD = 6.22 m / 10 + √2 · 6.22 m / 10 = 1.5 m1.5 m4.28 m2.85
Viollet-le-DucD = 4.32 m · (1 − cos(2 · 73.7 ° / 3)) = 1.49 m1.49 m4.28 m2.86
HaseD = 1.49 m + 0.15 m · 5.35 m / 4.5 m = 1.67 m1.67 m4.28 m2.56
Earlier editionsD = (4.32 m + 0.3 m) / cos(37.4 °) − 4.32 m = 1.5 m1.5 m4.28 m2.86

Building has: the buttress, from the inner face of its wall

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.42.

QuantityValue
Vault thrust per bay (estimate, Table I)55 kN
Height of the thrust (springing)28.28 m
Buttress depth (measured)4.28 m
Buttress breadth (assumed: half the depth)2.14 m
Thrust it holds: block | cracked470 | 157 kN
Minimum depth: block | cracked2.09 | 3.02 m
GSF on depth: block | cracked2.05 | 1.42
Fracture height28.28 m
1890: base joint, eccentricity ÷ kern0.35

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.