Skip to content
Ungewitter

← All reference buildings

Beauvais Cathedral

Beauvais · Cathédrale Saint-Pierre de Beauvais · Kathedrale von Beauvais · Wikidata Q513300

6 measured · 2 published · 9 provisional

The highest Gothic vault; the collapse of 1284 is the limit case. A CC BY 4.0 laser scan exists (Open Heritage 3D).

Facts

Main building campaign
1225–1272 provisionalen Wikipedia, revision 1379819729Choir begun 1225, completed 1272; its vaults collapsed in 1284 and were rebuilt with added piers.
Plan type
Basilica, 5 vessels, with transept provisionalde Wikipedia, revision 269199122
Material
stone provisionalfr Wikipedia, revision 239813440fr: chalk, a soft light limestone.
Nave bays
3 provisionalfr Wikipedia, revision 239813440Three straight choir bays and a hemicycle of seven (fr).
Choir ending
7/12: 7 sides of a 12-sided polygon provisionalde Wikipedia, revision 269199122
Towers
Crossing tower of about 153 m (1569), collapsed in 1573. provisionalde Wikipedia, revision 269199122
Vaults
Nave: sexpartite provisionalfr Wikipedia, revision 239813440fr: after the collapse of 1284 the choir vaults became sexpartite through an added transverse rib; plate 363 draws them quadripartite.
East end
an ambulatory with 7 radiating chapels publishedDehio & von Bezold, Tafel 363, Fig. 8Seven radiating chapels.
Towers in plan
no west tower provisionalde Wikipedia, revision 269199122The nave was never built; the crossing tower of 1569 collapsed in 1573.
Flying buttresses
2 tiers, one above the other publishedDehio & von Bezold, Tafel 386, Fig. 1Two tiers, each in two flights over the double aisles.
Five-aisle system
heights stepped down to the outer aisles (p. 289) publishedLehrbuch der gotischen Konstruktionen. 3rd ed., Part I · p. 289The book names Beauvais for the stepping applied to the ambulatory and the chapels (system 3).

Dimensions

DimensionsValueConventionSource
Nave width15.52 m ± 0.2 maxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3899, 2692) to (4092, 2692) px; scale 30 m = 373 px

Choir piers (straight bays), axis to axis.

Other figures
  • 16 m · convention not stated provisionalfr Wikipedia, revision 239813440fr and the en infobox. The article does not say whether the width is axis to axis or clear.
Aisle widths7.32 m ± 0.2 mInner choir aisle, pier axis to pier axisaxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3808, 2692) to (3899, 2692) px; scale 30 m = 373 px
7.04 m ± 0.2 mOuter choir aisle, pier axis to inner face of the wallaxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3720.5, 2692) to (3808, 2692) px; scale 30 m = 373 px
Bay length9.13 m ± 0.2 maxis to axismeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3899.5, 2580.5) to (3899.5, 2694) px; scale 30 m = 373 px

Choir pier axes, one straight bay as first built. After 1284 an intermediate pier was set in each straight bay, halving the span of the arcades.

Nave vault height46.77 mto the crownprovisionalde Wikipedia, revision 269199122

Choir, de: 144 pieds du roi; de gives 48.50 m for the south transept.

Other figures
Piers2.17 m ± 0.2 mChoir pier across the shafts, transverseoverallmeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3885.5, 2692) to (3912.5, 2692) px; scale 30 m = 373 px
Buttress depths4.26 m ± 0.2 mChoir buttress (straight bays), outer face to inner face of the outer aisle walloverallmeasuredDehio & von Bezold, Tafel 363, Fig. 8measured from (3667.5, 2692) to (3720.5, 2692) px; scale 30 m = 373 px

The design in plan

Plan of the design made from Beauvais Cathedral: sexpartite nave vaults, an ambulatory with 7 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side. The church has two aisles on each side; the drawing shows the inner one.

One bay in plan, to scale

Plan of one bay of Beauvais Cathedral: nave 15.52 m between pier axes, buttress depth 4.26 m; dashed outline of Amiens Cathedral for comparison.15.52 m4.26 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave sexpartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress4.26 m measured4 m4 m
Building ÷ this depth–1.061.06
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked1.29 against 1: safe1.21 against 1: safe1.21 against 1: safe
Pier (1890 plan rule)2.17 m2.11 m–
Wall between the buttresses (1890 plan rule)–1.48 m–

Forces at the springing of the nave vault, 37.83 m above the floor.

Why they differ

  • The measured depth lies within 10 % of the depth the 1890 statics asks for: the book’s kern rule describes this buttress well.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 13.35 m, springing at 37.87 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = (0.222 · 13.35 m + 0.05 · 37.87 m) · 0.891 = 4.33 m4.33 m17.53 m4.05
HoffstadtD = 13.35 m / 10 + √2 · 13.35 m / 10 = 3.22 m3.22 m17.53 m5.44
Viollet-le-DucD = 9.27 m · (1 − cos(2 · 73.7 ° / 3)) = 3.21 m3.21 m17.53 m5.47
HaseD = 3.21 m + 0.15 m · 37.87 m / 4.5 m = 4.47 m4.47 m17.53 m3.92
Earlier editionsD = (9.27 m + 0.3 m) / cos(37.1 °) − 9.27 m = 2.73 m2.73 m17.53 m6.41

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.29.

QuantityValue
Vault thrust per bay (estimate, Table I)72 kN
Height of the thrust (springing)37.87 m
Buttress depth (measured)4.26 m
Buttress breadth (assumed: half the depth)2.13 m
Thrust it holds: block | cracked464 | 155 kN
Minimum depth: block | cracked2.29 | 3.3 m
GSF on depth: block | cracked1.86 | 1.29
Fracture height37.87 m
1890: base joint, eccentricity ÷ kern0.46

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.