Skip to content
Ungewitter

← All reference buildings

Santa Maria del Mar, Barcelona

Barcelona · Basílica de Santa Maria del Mar · Wikidata Q908802

5 measured · 2 published · 8 provisional

Catalan Gothic at its most spacious, built 1329–1383: three vessels of nearly the same height (the aisles 7/8 of the nave) on slender octagonal piers, with chapels between internal buttresses as at Girona. The heights and widths in the articles are derived from a module of 100 medieval feet (Bracons) and stay provisional.

Facts

Main building campaign
1329–1383 provisionalca Wikipedia, revision 38949940Works contract 2 Mar 1329; last keystone 3 Nov 1383.
Plan type
Basilica, 3 vessels, no transept provisionalde Wikipedia, revision 270974844Basilica type, three vessels forming one space, no transept.
Material
stone provisionalca Wikipedia, revision 38949940ca: stone from Montjuïc, granted in 1368.
Nave bays
4 provisionalca Wikipedia, revision 38949940Four nave bays; presbytery half bay plus polygon.
Choir ending
7/14: 7 sides of a 14-sided polygon provisionalDehio & von Bezold, Tafel 508, Fig. 3Seven sides on a semicircle.
Vaults
Nave: quadripartite publishedDehio & von Bezold, Tafel 508, Fig. 3With ridge ribs.
East end
an ambulatory with 7 radiating chapels publishedDehio & von Bezold, Tafel 508, Fig. 3Seven shallow chapels between the buttresses.
Towers in plan
two west towers provisionalDehio & von Bezold, Tafel 508, Fig. 3Two slender octagonal towers at the corners of the west front.
Flying buttresses
one tier provisionalDehio & von Bezold, Tafel 518, Fig. 4One short flyer, filled with masonry underneath.

Dimensions

DimensionsValueConventionSource
Nave width13.86 m ± 0.1 mNave piers, axis to axisaxis to axismeasuredDehio & von Bezold, Tafel 508, Fig. 3measured from (4355, 1517) to (4774, 1517) px; scale 40 m = 1209 px
Other figures
Aisle widths6.78 m ± 0.1 mNorth aisle, pier axis to the aisle faces of the internal buttressesaxis to axismeasuredDehio & von Bezold, Tafel 508, Fig. 3measured from (4149.5, 1512) to (4354.5, 1512) px; scale 40 m = 1209 px
Other figures
Bay length13.97 m ± 0.05 mNave pier axes over 3 baysaxis to axismeasuredDehio & von Bezold, Tafel 508, Fig. 3measured from (4362, 1099.5) to (4362, 2366) px; scale 40 m = 1209 px · over 3 bays
Nave vault height33 mconvention not statedprovisionalen Wikipedia, revision 1379933674

Derived: max height 100 medieval feet of 0.33 m, after Bracons, El País 2006.

Piers1.65 m ± 0.1 mNave pier, octagonal core without the plinth, transverseoverallmeasuredDehio & von Bezold, Tafel 508, Fig. 3measured from (4336.5, 1955) to (4386.5, 1955) px; scale 40 m = 1209 px
Buttress depths3.77 m ± 0.1 mInternal buttress (north), aisle face to the outer face of the chapel walloverallmeasuredDehio & von Bezold, Tafel 508, Fig. 3measured from (4035.5, 1512) to (4149.5, 1512) px; scale 40 m = 1209 px

The design in plan

Plan of the design made from Santa Maria del Mar, Barcelona: quadripartite nave vaults, an ambulatory with 7 radiating chapels.010 m
The Studio design made from the values on this page, drawn by the Studio’s own generators: cut masonry black, vault ribs dashed overhead. It is a design after the building, not a survey of it. The east end comes from the chevet generator (Ch. VI), which draws the church with one aisle on each side.

One bay in plan, to scale

Plan of one bay of Santa Maria del Mar, Barcelona: nave 13.86 m between pier axes, buttress depth 3.77 m; dashed outline of Amiens Cathedral for comparison.13.86 m3.77 m010 m
Drawn from the values above: nave piers, aisles, outer wall and buttresses of one bay. Buttress breadth is schematic. The dashed outline is Amiens Cathedral at the same scale.

As a design

The measured values as a Studio design: vessels, nave width, aisle and bay ratios, nave bays, choir ending and transept, the springings (measured, or the vault crown less a rise of 2:3 over the clear span), the piers and the material. The recorded facts above, each with its source, give the vault types (the nave quadripartite), the chevet, the towers and the tiers of flyers; the building’s date sets the period of its tracery and portals. Everything else keeps the Studio’s defaults.

Measured against the 1890 statics and the modern check

The design is sized twice at its typical nave bay: by the 1890 statics (the least depth of wall and buttress that keeps the line of pressure in the kern) and by the modern check (Heyman: the least depth with a geometric factor of 2). The depth measured on the plate is then checked with the same forces by both criteria, so all three columns are judged alike.

Measured against the 1890 statics and the modern check
QuantityBuilding, measuredUngewitter 1890, staticsModern check (Heyman)
Depth of wall and buttress3.77 m measured3.06 m3.06 m
Building ÷ this depth–1.231.23
Kern rule of 1890kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)kern left in the storm only (with wind from the left)
Geometric factor, cracked1.33 against 1: safe1.08 against 1: safe1.08 against 1: safe
Pier (1890 plan rule)1.65 m1.88 m–
Wall between the buttresses (1890 plan rule)–1.36 m–

Forces at the springing of the nave vault, 24.82 m above the floor.

Why they differ

  • The building is deeper than the statics asks. Its buttresses stand at the foot of one tier of flyers: they had to give the flyers room, carry their thrust at its height and stand during building, before the vaults were closed. The kern rule asks only what the finished bay needs.
  • The check is drawn in one plane: one typical bay of the nave, the buttress breadth taken as a share of its depth, the wall as measured where known. Real buttresses vary along the church.

Ungewitter’s rules against this building

The rules of experience reported by Ungewitter and Mohrmann (1890, pp. 273–276) size the abutment of one vault span. Here they are applied to this building’s spans and heights and set against the buttresses measured on the plate.

In a basilica the nave vault is abutted through the flying buttresses by the whole system: aisles and outer buttress together. Ungewitter’s single-span rules were never meant for it, which is the point of the comparison.

Nave vault: span 12.21 m, springing at 24.86 m

RuleFilled inRule saysBuilding hasBuilding ÷ rule
Mohrmann, rule 5D = 0.222 · 12.21 m + 0.05 · 24.86 m = 3.96 m3.96 m9.73 m2.46
HoffstadtD = 12.21 m / 10 + √2 · 12.21 m / 10 = 2.95 m2.95 m9.73 m3.3
Viollet-le-DucD = 8.48 m · (1 − cos(2 · 73.7 ° / 3)) = 2.93 m2.93 m9.73 m3.31
HaseD = 2.93 m + 0.15 m · 24.86 m / 4.5 m = 3.76 m3.76 m9.73 m2.58
Earlier editionsD = (8.48 m + 0.3 m) / cos(37.2 °) − 8.48 m = 2.54 m2.54 m9.73 m3.83

Building has: whole abutment system: aisles + buttress, from the nave pier’s face

No aisle vault height is known, so the aisle vault is not checked.

Assumptions

  • Vault rise 2/3 of the span (a low pointed arch); springing height = vault height − rise.
  • Heavy stone; no help from the walls between the buttresses.

The modern check: Heyman’s geometric factor

The rules above size a buttress by proportion. Here the measured buttress is checked by limit analysis against an estimate of the vault’s thrust: how much shallower could it be before it overturns, as one block and once cracked?

The buttress holds the estimated thrust, but cracked its geometric factor is only 1.02.

QuantityValue
Vault thrust per bay (estimate, Table I)100 kN
Height of the thrust (springing)24.86 m
Buttress depth (measured)3.77 m
Buttress breadth (assumed: half the depth)1.89 m
Thrust it holds: block | cracked321 | 107 kN
Minimum depth: block | cracked2.56 | 3.69 m
GSF on depth: block | cracked1.47 | 1.02
Fracture height24.86 m
1890: base joint, eccentricity ÷ kern0.94

Assumptions

  • Estimates: quadripartite vault, rise 2/3 of the span, Table I (mean H₀); ashlar 24 kN/m³; the thrust acts on the inner face at the springing; buttress breadth half its depth; the masonry above the springing (pinnacles) is ignored, which is conservative.
  • In a basilica the outer buttress takes the nave vault’s thrust through the flyers; the aisle vault is left out.
  • Cracked buttress after Ochsendorf (2002) and Ochsendorf, Hernando & Huerta (2004): a straight fracture from the toe, its height from the published equations (checked against both worked examples).

How the modern check works →

Plates

Public-domain plates of this building in Dehio and von Bezold’s atlas. Open them in the Heidelberg viewer or measure them with tools/plate-digitiser.

Sources

Every work this page cites, with the plates and article revisions it uses. The plates of Dehio and von Bezold are in the public domain; Wikipedia articles serve as pointers, each fixed to its revision.